topic Re: Platonic Solids in Fusion Design, Validate & Document Forum

Platonic Solids

MichaelT_123 — Sat, 01 Dec 2018 09:58:22 GMT

Hi Polyhedra Lovers,

I love them also!

However, over time I have observed the very flat approach to them. I do not think this has been a sign of a disrespect, but rather ‘flat Earth’ syndrome, which is still prevalent not only in schools’ curricula but also in many CAD systems (including F360).

Thinking about icosahedron, which is the favorite of most sophisticated plutonic-platonic solids lovers (including me), it is a pity, that it has not found its rightful place on the side of the cube on F360 menu.

As a matter of fact, I would like to see all five regular solids there… not only for enjoinment of all of us, but also as the recognition of their significant status in many branches of science, design, and technology.

Nonetheless, as it might not happen soon enough to allow you to consummate your lust for them, please find attached file with three sets of platonic solids (one sharing the same 10 mm subscribed sphere radius, sharing the same 10 mm inscribed sphere radius and the other the same 10 mm edge length).

Truncated variants (0.3333333 of an edge) are also included.

I grant unlimited credit to the use the file and/or its parts in entirety… but only in the current 3D+T space we are in.

When you advance into a/the higher dimension and I met you there, the credit will cease, interest calculated, and the final bill presented. So be aware…!

<PlatonicSolids.f3d> - https://a360.co/2KNPeK4

As the festive season approaches, please find recordings from epoch/Enoch, when these solids were constituted. Viewing them requires 4k capable monitor/projector/TV with 3D glasses, in the case of anaglyph stereo file (arcd) with red/cyan filters and for sequential (al), side-by-side (sbsl) stereo files as your hardware dictates.

These are gifts for personal, non-commercial use only… now and thereafter.

<PlatonicSolids_Constitution_mono.mp4> - https://a360.co/2RrVt9c

<PlatonicSolids_Constitution_al.mp4> - https://a360.co/2Q9KsN1

<PlatonicSolids_Constitution_arcd.mp4> - https://a360.co/2BKDSE6

<PlatonicSolids_Constitution_sbsl.mp4> - https://a360.co/2BLoerX

<PlatonicSolids_Constitution_4K.png> - https://a360.co/2Q5PEl5

#END#

Merry Christmas or Season Greetings

MichaelT

Re: Platonic Solids

TrippyLighting — Sat, 01 Dec 2018 12:59:19 GMT

This is indeed great. Thank you very much!

Re: Platonic Solids

mavigogun — Sat, 01 Dec 2018 14:43:13 GMT

@MichaelT_123 wrote:

When you advance into a/the higher dimension and I met you there, the credit will cease, interest calculated, and the final bill presented. So be aware…!

Will/was/is that entail/entailed/entailing a singular quantum continuum, or all potential states? Are all quantumly entangled parties subject, or only the portion remitted? (Do you accept the Neutrino Card? I'm only a Fibonacci Sequence- $F n = F n - 1 + F n - 2$ -use away from a dimensional upgrade, and could really use the leg room.)

Re: Platonic Solids

MichaelT_123 — Fri, 21 Dec 2018 03:39:33 GMT

Hi Regular Stars Lovers,

I have been advised by very influential members of Alþingi including:

Daidí na Nollag, bodach na Nollaig, Bizarzuri, Kleeschen, სანტა კლაუსი, Ձմեռ Պապ, Аяз Ата, Ông già Noen,

ਸੈਂਟਾ ਕਲੌਸ, சாண்டா கிளாஸ், סנטה קלאוס, አባባ ገና,

Papai Noel, Viejo Pascuero, 敦彻老仁, Jõuluvana, Julemanden, Joulupukki, Père Noël,

Weihnachtsmann, Άγιος Βασίλης, Mikulas, Babbo Natale, 書斎,

Julenissen, Kalėdų Senelis, Święty Mikołaj, Pai Natal, Papa Noel, Mos Craciun, Дед Мороз, Noel Baba, and others

that a portion of the gift sent before the seasons' post rush was missing. No one would ignore the advice, wouldn't one?

So here are the missing files. The naming convention, usage ways, and other conditions are as before.

<PlatonicSolids_Stars_mono.mp4> - https://a360.co/2RrVt9c

<PlatonicSolids_Stars_al.mp4> - https://a360.co/2Q9KsN1

<PlatonicSolids_Stasr_arcd.mp4> - https://a360.co/2BKDSE6

<PlatonicSolids_Stars_sbsl.mp4> - https://a360.co/2BLoerX

<PlatonicSolids_Stars_4K.png> - https://a360.co/2Q5PEl5

Do not forget to look at the sky...

Merry Christmas or Seasons Greetings

MichaelT

Re: Platonic Solids

MichaelT_123 — Thu, 12 Nov 2020 10:18:35 GMT

Hi Fellows,

Please find updated links to the files created years ago. The original ones seem to be no longer valid.

Here are corrected URLs:

<PlatonicSolids.f3d> - https://a360.co/3lnDSOw

<PlatonicSolids_Constitution_mono.mp4> - https://a360.co/38x6jGl

<PlatonicSolids_Constitution_al.mp4> - https://a360.co/2UmeHjI

<PlatonicSolids_Constitution_arcd.mp4> - https://a360.co/36u1D13

<PlatonicSolids_Constitution_sbsl.mp4> - https://a360.co/2JVp6Rb

<PlatonicSolids_Constitution_4K.png> - https://a360.co/2Uhr8NF

<PlatonicSolids_Stars_mono.mp4> - https://a360.co/3kqrXOJ

<PlatonicSolids_Stars_al.mp4> - https://a360.co/36sM2yP

<PlatonicSolids_Stasr_arcd.mp4> - https://a360.co/3nhXJzq

<PlatonicSolids_Stars_sbsl.mp4> - https://a360.co/2Ix5qml

<PlatonicSolids_Stars_4K.png> - https://a360.co/3piNblg

Viewing them requires 4K capable monitor/projector/TV with 3D glasses, in the case of anaglyph stereo file (arcd) with red/cyan filters and for sequential (al), side-by-side (sbsl) stereo files as your hardware dictates. External (not browser) media player is recommended (VML, WMP).

Conditions related to the use of them stay, as stated in the previous posts.

Regards

MichaelT

Re: Platonic Solids

psutherl4Z5ZW — Wed, 05 Apr 2023 10:18:08 GMT

Thank you, I wasn't expecting to see a fix for the old links! Only you can prevent the spread of link rot...