https://forums.autodesk.com/t5/fusion-design-validate-document/parametric-existence-of-a-part/m-p/8513950#M144993 <P>File&gt;Export and then Attach the *.f3d file of your attempt here.</P> Thu, 10 Jan 2019 18:07:58 GMT TheCADWhisperer 2019-01-10T18:07:58Z https://forums.autodesk.com/t5/fusion-design-validate-document/parametric-existence-of-a-part/m-p/8513903#M144992 <P>I am creating a linear pattern of parts that are each 48" wide. If my desired overall length is not a factor of 4' then I would like a small "plug" to be created at a custom dimension that fills the leftover space. I am doing fine with all of the functions up to the point of when my desired linear dimension is a factor of 4'. The parameters leave in the small plug, overlapping the last 4' part.&nbsp;</P> Thu, 10 Jan 2019 17:51:45 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/parametric-existence-of-a-part/m-p/8513903#M144992 EDukeCNC 2019-01-10T17:51:45Z https://forums.autodesk.com/t5/fusion-design-validate-document/parametric-existence-of-a-part/m-p/8513950#M144993 <P>File&gt;Export and then Attach the *.f3d file of your attempt here.</P> Thu, 10 Jan 2019 18:07:58 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/parametric-existence-of-a-part/m-p/8513950#M144993 TheCADWhisperer 2019-01-10T18:07:58Z