topic Re: Design help in Fusion Design, Validate & Document Forum

Design help

omarhusseinramadan — Fri, 06 Sep 2024 10:08:26 GMT

Hello, I’m currently doing the ‘Introduction to Mechanical Engineering Design and Manufacturing with Fusion

360’ course however I’m struggling with the first design challenge (attached below).

If someone could please send a step-by-step explanation of how to do it, I would be very grateful.

Thank you very much.

Re: Design help

CGBenner — Fri, 06 Sep 2024 10:52:47 GMT

@omarhusseinramadan

Welcome to the Community. Can you share some more information about the class you are taking, or a link to the site?

Have you started the exercise? Maybe you could share what you have done so far for others to take a look at.

Re: Design help

Drewpan — Fri, 06 Sep 2024 11:57:14 GMT

Hi,

I would strongly recommend that you do the embedded tutorials in the Fusion Documentation and also some of the

Self-Paced Learning to help you to learn fusion faster and better. They can be found here:

It is also much easier for the forum to help you if you attach your file AND a screenshot of what you want to achieve

and what the problem is. You can create a file to export like this:

Time spent on the tutorials and self paced learning will not be wasted. Also check out the three RULES that are pinned to the forum for further guidance.

Cheers

Andrew

Re: Design help

omarhusseinramadan — Wed, 11 Sep 2024 16:48:45 GMT

Hello, The course Im doing is about autodesk fusion design and focus more on mechanical engineering, a part of it includes creating renders, joints, animation, as well as creating and simulating toolpaths and simulations in general. The course link: ' https://www.coursera.org/learn/mechanical-engineering-design-manufacturing/home/welcome '

I've started the exercise this is what i have so far:

I cannot figure out how to remove the areas marked.

Re: Design help

etfrench — Wed, 11 Sep 2024 18:02:53 GMT

What are the instructions in the tutorial?

Re: Design help

omarhusseinramadan — Sat, 14 Sep 2024 14:04:10 GMT

These are the instructions. The link is in the original post

Re: Design help

CGBenner — Wed, 18 Sep 2024 10:49:28 GMT

@omarhusseinramadan

It looks like where you are struggling is with Shell. @etfrench is there a way in Fusion to select faces that you not want to include in the Shell command? Am I seeing the problem right?

Re: Design help

etfrench — Wed, 18 Sep 2024 17:28:15 GMT

I can't access the site to see the individual instructions.

You can select multiple faces in Shell which should entirely remove those faces.

Re: Design help

CGBenner — Mon, 23 Sep 2024 10:40:26 GMT

@omarhusseinramadan Hello, do you still need help with this question?