https://forums.autodesk.com/t5/fusion-design-validate-document/hole-not-centered/m-p/8744746#M136980 <P>I would export the gerbers to dxf, then import the dxf into Fusion 360 to verify.</P> Mon, 22 Apr 2019 07:36:59 GMT etfrench 2019-04-22T07:36:59Z https://forums.autodesk.com/t5/fusion-design-validate-document/hole-not-centered/m-p/8742754#M136977 <P>Hello this is my first time using Fusion360 and autodesk eagle,iam trying to just make some simple screw holes for a pcb but when i project to find the center of the hole i look at the board and the 3d board hole isnt exactly centered.When i take the circle tool and go from the center of the hole it isnt truly the center point.What am i doing wrong i attached a image so you can see exactly what is wrong.Thanks</P> Sat, 20 Apr 2019 00:34:00 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/hole-not-centered/m-p/8742754#M136977 32loyal 2019-04-20T00:34:00Z https://forums.autodesk.com/t5/fusion-design-validate-document/hole-not-centered/m-p/8743235#M136978 <P>Attach your file here or provide public link.</P> Sat, 20 Apr 2019 13:38:46 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/hole-not-centered/m-p/8743235#M136978 TheCADWhisperer 2019-04-20T13:38:46Z https://forums.autodesk.com/t5/fusion-design-validate-document/hole-not-centered/m-p/8744734#M136979 <P>Talking to the Eagle team they said it is a image scale issue on the PCB side,but the center of the hole on fusion is still true center</P> Mon, 22 Apr 2019 07:28:05 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/hole-not-centered/m-p/8744734#M136979 32loyal 2019-04-22T07:28:05Z https://forums.autodesk.com/t5/fusion-design-validate-document/hole-not-centered/m-p/8744746#M136980 <P>I would export the gerbers to dxf, then import the dxf into Fusion 360 to verify.</P> Mon, 22 Apr 2019 07:36:59 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/hole-not-centered/m-p/8744746#M136980 etfrench 2019-04-22T07:36:59Z