topic Re: Possible Bug when editing sketch in Fusion Design, Validate & Document Forum

Possible Bug when editing sketch

mikelerwill — Thu, 06 Jun 2019 12:26:27 GMT

The attached file has four items in the timeline, sketch,extrude,sketch,extrude. The second pair are currently suppressed.

If I open the file and unsuppress the two items and then edit the sketch nothing appears.

To be able to edit the sketch I have to first save with the features unsuppressed then close and reopen the design.

Can someone confirm if this is a bug or if I am doing something wrong.

Thanks

Mike Lerwill

Re: Possible Bug when editing sketch

TheCADWhisperer — Thu, 06 Jun 2019 13:05:13 GMT

Looks like a bug to me.

Re: Possible Bug when editing sketch

mikelerwill — Wed, 12 Jun 2019 10:49:45 GMT

Thanks theCADWhisperer, How do I ensure this has got the attention of someone at Autodesk, while it is easy to work around it would be nice to get it fixed someday.

I realise I may have been better off posting this in the support forum but there does not seem to be a way of moving it.

Re: Possible Bug when editing sketch

TheCADWhisperer — Wed, 12 Jun 2019 10:53:59 GMT

I doubt that much gets missed here.

The issue was probably noted.

Re: Possible Bug when editing sketch

TheCADWhisperer — Wed, 12 Jun 2019 11:21:11 GMT

However, I wouldn't mark it as solved until someone from Autodesk comes along and verifies that they can reproduce the issue. I noticed that I the only one who verified reproduction of the issue.

Re: Possible Bug when editing sketch

TrippyLighting — Wed, 12 Jun 2019 12:41:03 GMT

Let's see if we can bring this to their attention: @ryan.bales

Re: Possible Bug when editing sketch

ryan.bales — Wed, 12 Jun 2019 17:23:52 GMT

Thanks @TrippyLighting, good to be back in the forums after a vacation!

That is strange, probably a good idea to tag @jeff_strater as well. I think he and have seen this before but that model was for more complex than this one.

@mikelerwill, is this a one off case or does this happen easily from a new file?

Re: Possible Bug when editing sketch

mikelerwill — Wed, 12 Jun 2019 20:49:56 GMT

Ryan,

The file supplied was created from scratch simply to demonstrate. The problem was originally discovered in a more complex part and occurs the same way in two designs.

regards

Mike Lerwill

Re: Possible Bug when editing sketch

jeff_strater — Sat, 22 Jun 2019 00:25:36 GMT

yes, this is a known bug: FUS-35158. I'll ping the team on the status of it... Thanks for reporting this.