topic Re: SKETCH in Fusion Design, Validate & Document Forum

SKETCH

Anonymous — Sat, 08 Jun 2019 20:22:22 GMT

AT THE RIGHT WHAT I SUPPOSED TO DO AND THE LEFT WHAT I DID , iCANT TYPE 171.6

ANYONE KNOW WHY ?

THANK YOU

Betreff: SKETCH

g-andresen — Sat, 08 Jun 2019 21:49:13 GMT

Hi,

From the screenshots I cannot see any connections that would allow an answer.

Please share your design.

günther

Re: SKETCH

davebYYPCU — Sat, 08 Jun 2019 21:55:23 GMT

Please supply the complete source video - mentioned in other threads.

and your completed file up to date, file export to hard drive then attach here.

For this project each sketch question can be added on.

The screen pix and video clips, don’t show Browser, timeline and things we need to understand what you do, doesn’t follow the tutorial.

To answer your specific question, presumes the keyboard is still working.

the two pictures have different detail, blue line from lower left servo, so I don’t know.

Re: SKETCH

Anonymous — Sun, 09 Jun 2019 02:08:45 GMT

here is the tutorial video : https://drive.google.com/file/d/1ABdLrXqLWc0BnTX-AqXAq0FgWQbKBmd8/view?usp=sharing

and I dont know how to do the rest which is what you recommend , what I asked before I could do it after many attempts and then I cant do this , it is the 1;45 min on the video

Re: SKETCH

chrisplyler — Sun, 09 Jun 2019 02:38:30 GMT

You see the blue line in your picture? The one dimensioned to 30.063?

Well, in order for your black line to move over, that blue line is going to have to change both it's orientation and it's length, right? But you've got it dimensioned, so it can't change length. So the black line can't be moved over. The math can't be solved such that the black line moves over to 171.6 and the blue line stays 30.063. It does not compute. Get it?

Notice that in the other picture, that blue line doesn't have a dimension associated with it. It isn't locked in. So it's free to change length as necessary to accommodate the desired change.

Re: SKETCH

Anonymous — Sun, 09 Jun 2019 04:23:00 GMT

So what I have to do now ?

@chrisplyler

Re: SKETCH

davebYYPCU — Sun, 09 Jun 2019 22:53:19 GMT

Stop the instruction video at 3 minutes.

check that your Sketch is the same as his.

That 171.6 mm Move / Dimension was a mistake he made and later changed, so there is no need to step by step. Make sure your Sketch is the same as his at 3 minutes.

Then proceed with Offset.....

Re: SKETCH

chrisplyler — Mon, 10 Jun 2019 13:24:59 GMT

@Anonymous wrote:
So what I have to do now ?

Um...I would have thought that was obvious. Delete the dimension on that blue line, then you'll be able to change the other dimension.