topic Re: Unable to Select Midpoint in 3D model in Fusion Design, Validate & Document Forum

Unable to Select Midpoint in 3D model

gyuneshmehmed — Thu, 25 Jul 2019 07:34:44 GMT

Hello my colleagues,

I learning from the tutorials and in the tutorial in the link https://f360ap.autodesk.com/courses/mechanical-assemblies-fundamentals/lessons/lesson-3-construction-geometry

, i dont find the mid point after offset plane and Sketch.

I attached 2 pictures, in the first is my drawing and second is the from tutorial.

Thanks.

Re: Unable to Select Midpoint in 3D model

jeff_strater — Fri, 26 Jul 2019 00:03:16 GMT

it looks as if you may have skipped a step in the tutorial. The tutorial image shows a line in the sketch. Yours seems to be missing that line. You need the line in order to snap to the midpoint:

Re: Unable to Select Midpoint in 3D model

gyuneshmehmed — Fri, 26 Jul 2019 07:18:55 GMT

I have the same problem in the other tutorials. Maybe this is very simple problem, but i dont know how i select the cirlce because, the circle lines is not showing.

Thanks.

Re: Unable to Select Midpoint in 3D model

g-andresen — Fri, 26 Jul 2019 08:39:43 GMT

Hi,

Is it possible that the docking element is in a non-active sketch? Then you have to make contact to this sketch by projecting (p). Or you activate the option autoproject to sketch in the preferences, then it happens automatically.

günther

Re: Unable to Select Midpoint in 3D model

gyuneshmehmed — Fri, 26 Jul 2019 10:38:42 GMT

Thanks, I activate the option autoproject from preferences and everything is Ok.