topic Re: Solidworks part upload to Fusion 360 free edition in Fusion Design, Validate & Document Forum

Solidworks part upload to Fusion 360 free edition

leclere.patrick — Mon, 25 Nov 2019 12:49:57 GMT

Since the last update the translation of Solidworks .SLDPRT files to Fusion360 format doesn't work for me since the last update. It worked on previous versions. I attached a file .

Is there a way to fix that because I use quite often some Solidworks files send by a friend

Re: Solidworks part upload to Fusion 360 free edition

HughesTooling — Mon, 25 Nov 2019 12:52:33 GMT

Cloud translators are no longer included with the free version. You could try using grabcad to translate.

Mark

Re: Solidworks part upload to Fusion 360 free edition

TheCADWhisperer — Mon, 25 Nov 2019 13:47:39 GMT

@leclere.patrick wrote:
... some Solidworks files send by a friend

Tell your friend that flat bottom holes are more expensive to manufacture than drilled holes (118°), and that threaded holes can be generated directly using the SolidWorks Hole command (the three holes were specified to be M5 threads).

See attached file.

Re: Solidworks part upload to Fusion 360 free edition

leclere.patrick — Tue, 26 Nov 2019 19:27:14 GMT

Thank's for answers.

That's what I feared.