topic Re: Problem with converting a Stl to a Body in Fusion in Fusion Design, Validate & Document Forum

Problem with converting a Stl to a Body in Fusion

ianhughes7UFVF — Sun, 05 Jan 2020 12:13:51 GMT

I am converting a stl to a body in fusion. It converted so far but it still wont become a body.

Is there something I am missing.

Regards

Ian

Re: Problem with converting a Stl to a Body in Fusion

JeromeBriot — Sun, 05 Jan 2020 12:42:11 GMT

Hello,

The mesh is not fully closed so Fusion 360 creates a surface instead of a solid body.

Use Meshmixer to repair the mesh. Go to the menu Analysis > Inspector and click on Auto Repair All.

Export the repaired mesh and now Fusion 360 will convert it to a solid body.

See attached file below.

Re: Problem with converting a Stl to a Body in Fusion

ianhughes7UFVF — Sun, 05 Jan 2020 12:43:33 GMT

Thanks for that.

I better download meshmixer and learn how to use it.

I appreciate the direction.

Regards

Ian

Re: Problem with converting a Stl to a Body in Fusion

TheCADWhisperer — Sun, 05 Jan 2020 12:53:36 GMT

For geometry that simple I would remodel from scratch rather than use coarsely faceted planar triangles in any of my designs.

Re: Problem with converting a Stl to a Body in Fusion

ianhughes7UFVF — Sun, 05 Jan 2020 13:01:18 GMT

I agree and I am more than capable of it now.

The file is for a chap who has a set of stls that are simular to what I have already created. He wants to mix these stls with stls of parts that I have already done.

I didn't want to have to redo all my work.

But I agree. I am now in the mind set that I would rather create things from scratch if I can now.

Regards

Ian

Re: Problem with converting a Stl to a Body in Fusion

TheCADWhisperer — Sun, 05 Jan 2020 13:46:53 GMT

I didn't search for the opening - but if found, you could probably easily use a Patch and then Stitch in Fusion rather than bothering to go to MeshMixer for this simple part.