topic Re: Conflicting Joints in Fusion Design, Validate & Document Forum

Conflicting Joints

tvanb96M42 — Sun, 05 Jan 2020 12:52:38 GMT

Hi All,

I tried to model a joystick, with three revolute joints and a planar joint. The revolute joints are obvious if you watch the screencast. The final (planar) joint to force the yellow stick part in the slot of the blue guide results in a conflict.

How could I address this issue?

c2ee55a6-be37-4a09-90d4-db21d1cc6284,640,620

Re: Conflicting Joints

g-andresen — Sun, 05 Jan 2020 12:39:02 GMT

Hi,

please share your design.

Then it can be explained using a model.

günther

Re: Conflicting Joints

tvanb96M42 — Sun, 05 Jan 2020 12:53:18 GMT

I added it to the original post.

Re: Conflicting Joints

TrippyLighting — Sun, 05 Jan 2020 17:28:45 GMT

You can achieve this easily with a motion link:

Re: Conflicting Joints

tvanb96M42 — Sun, 05 Jan 2020 18:10:18 GMT

Thanks Peter,

Exactly what I tried to achieve. Easy to replicate and does the job for me!

I'm still curious though if there is a reason why the planar joint was locking the assembly. Is it simply impossible or did I make an error in the design?

Kind regards,

Thijs