https://forums.autodesk.com/t5/fusion-design-validate-document/why-capturing-the-position-doesn-t-capture-the-position/m-p/9320600#M119016 <P>I'm not a software engineer but seems like something doable. Sometimes are hours of work wasted just because of this issue. Pull those stream. You can make it happen!</P> Sat, 15 Feb 2020 18:25:45 GMT jcsantilli 2020-02-15T18:25:45Z https://forums.autodesk.com/t5/fusion-design-validate-document/why-capturing-the-position-doesn-t-capture-the-position/m-p/9319628#M119014 <P>If I create a body with let's say a hole and move the body to a new position. There is a way to edit the hole size without the body going back to the position where it was created?</P> Fri, 14 Feb 2020 20:28:11 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/why-capturing-the-position-doesn-t-capture-the-position/m-p/9319628#M119014 jcsantilli 2020-02-14T20:28:11Z https://forums.autodesk.com/t5/fusion-design-validate-document/why-capturing-the-position-doesn-t-capture-the-position/m-p/9319638#M119015 <P>Not really, no. That's just the way that parametric modeling works. You can reorder the body move so that it comes before the hole feature. Depending on the hole, you also might be able to use press/pull in edit feature mode to modify the hole</P> Fri, 14 Feb 2020 20:32:51 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/why-capturing-the-position-doesn-t-capture-the-position/m-p/9319638#M119015 jeff_strater 2020-02-14T20:32:51Z https://forums.autodesk.com/t5/fusion-design-validate-document/why-capturing-the-position-doesn-t-capture-the-position/m-p/9320600#M119016 <P>I'm not a software engineer but seems like something doable. Sometimes are hours of work wasted just because of this issue. Pull those stream. You can make it happen!</P> Sat, 15 Feb 2020 18:25:45 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/why-capturing-the-position-doesn-t-capture-the-position/m-p/9320600#M119016 jcsantilli 2020-02-15T18:25:45Z https://forums.autodesk.com/t5/fusion-design-validate-document/why-capturing-the-position-doesn-t-capture-the-position/m-p/9320819#M119017 <P>Stop using the Move command. Use joints to position your components.&nbsp; See <A href="https://forums.autodesk.com/t5/fusion-360-design-validate/fusion-360-r-u-l-e-1-and-2/td-p/6581749" target="_blank" rel="noopener">Rule #1</A>.</P> Sat, 15 Feb 2020 23:45:57 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/why-capturing-the-position-doesn-t-capture-the-position/m-p/9320819#M119017 etfrench 2020-02-15T23:45:57Z https://forums.autodesk.com/t5/fusion-design-validate-document/why-capturing-the-position-doesn-t-capture-the-position/m-p/9320840#M119018 <P>&nbsp;</P><P>Yeah. And ESPECIALLY don't move BODIES. You're moving them WITHIN their component, and as such are moving them away from the associated sketches, origin, etc.</P><P>&nbsp;</P><P>&nbsp;</P> Sun, 16 Feb 2020 00:34:28 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/why-capturing-the-position-doesn-t-capture-the-position/m-p/9320840#M119018 chrisplyler 2020-02-16T00:34:28Z