topic Re: Changing a Line Length in Fusion Design, Validate & Document Forum

Changing a Line Length

Anonymous — Tue, 18 Feb 2020 21:54:38 GMT

Hi There
I am new and Still learning - But committed to improving my skills.

I've drawn an extruded 3D parallel shape, and drawn a Sketch on top, that I now want to resize.

I click on Edit Sketch, and on the lines, but can't see where the dimensions come up to then edit! Really not sure why it's so difficult.

How do I edit the size of this?

Thanks in advance

Re: Changing a Line Length

wmhazzard — Wed, 19 Feb 2020 02:10:04 GMT

When you have the sketch open to edit it, is the "show dimensions" box checked in the sketch palette? If that doesn't help you, please attach an f3d file of your model so we can figure it out.

Re: Changing a Line Length

MoshiurRashid — Wed, 19 Feb 2020 07:08:12 GMT

When you drew the sketch on the top, did you apply dimension in it?

Re: Changing a Line Length

g-andresen — Wed, 19 Feb 2020 10:04:20 GMT

Hi,

try this way:

dimension: line, point to point & edit

günther

Re: Changing a Line Length

Anonymous — Wed, 19 Feb 2020 10:15:13 GMT

Dear @james.stigwood ,

You can give dimensions to a sketch once you start a sketch or while editing a sketch by using shortcut 'D'.

Please follow the below screencast and if you still find any issues please share a public link so that people could identify the exact problem you were facing.

as shown in the figure copy the public link and share it

thank you.

Re: Changing a Line Length

Anonymous — Wed, 19 Feb 2020 10:17:36 GMT

how did you make gif?
what software did you use to make gifs?

Re: Changing a Line Length

g-andresen — Wed, 19 Feb 2020 10:54:47 GMT

Hi,

i prefer "Camtasia" what i´m familiar with.

But I also tried "Screen to GIF" (Free) > it´s ok.

günther

Re: Changing a Line Length

Anonymous — Wed, 19 Feb 2020 20:36:17 GMT

Thanks for this
The dimensions I think got deleted.... I made sure everywhere it was set to "Show"
What i did was re-add Dimensions.

I am not sure how I managed to do that, I would of thought that's not possible.