topic Re: Shell command not working as expected in Fusion Design, Validate & Document Forum

Shell command not working as expected

Anonymous — Sun, 23 Feb 2020 14:38:20 GMT

Hi All

Im busy design a sort of funnel with a Yin and Yang shape at the top (long story) After trying a lot of different things to just the the geometry on top, and finally getting to a solution I was decently happy with (open for criticism on that as well) I decided it was time to shell it... This however did not work... and i have no idea why.

If anyone could please explain to me what Im missing or why its not working and how to work around it, I would be very grateful 🙂

File attached and here is a screen-grab of the yin and yang geometry on the top.

Re: Shell command not working as expected

MoshiurRashid — Mon, 24 Feb 2020 14:21:20 GMT

Please post this topic in the design forum,

https://forums.autodesk.com/t5/fusion-360-design-validate/bd-p/124

Re: Shell command not working as expected

TrippyLighting — Mon, 24 Feb 2020 20:37:30 GMT

You are lofting into a singularity and that is almost never a good idea when the goal is top shall an object.

Re: Shell command not working as expected

chrisplyler — Tue, 25 Feb 2020 14:52:35 GMT

Can you please post a pic of what face(s) you would like to shell from? I'm not quite understanding the desired outcome.

As far as the basic geometry goes, unless you have a design functionality need that dictates the complexity, I would have made it something like this...very simple with one sketch and four features.

By the way, this Shells quite nicely from the bottom, if that is what you are after, at any reasonable thickness you might want.

Re: Shell command not working as expected

Anonymous — Tue, 25 Feb 2020 18:04:03 GMT

Hi @MoshiurRashid Will do, sorry got confused as to where the best place is to put it

@TrippyLighting Hmmm, I thought that might be the main problem... I'm not too used to working with lofts and have to this point used them minimally. Good to know of a pitfall to look out for in future 🙂

@chrisplyler ....Dude WOW, how did you accomplish that with so few features? Could you please share the file with me? As you can see from my design, I don't really know what the best way to design this, and not, the design doesn't completely call for a perfect Yin Yang, as long as it looks close enough I'm happy. And yes sorry, the shell would be from the side opposite the yin yang

Re: Shell command not working as expected

chrisplyler — Tue, 25 Feb 2020 20:21:47 GMT

Here you go... added the Shell, can edit it and put in whatever thickness value you want. If you want to be efficient, you've got to design with laziness.

Re: Shell command not working as expected

Anonymous — Fri, 28 Feb 2020 18:26:09 GMT

Oh wow, I never thought of using the taper function in my extrusion. Cheers! Look great and should work fine