topic Combine cut a component from another complex component of components... in Fusion Design, Validate & Document Forum

Combine cut a component from another complex component of components...

laurent.chenet — Sat, 29 Feb 2020 18:04:42 GMT

Hello,

So, I'm probably still low on my learning curve, but yet I was already happy where I got, but I'm stuck at this very step.

I have a spiral based design. Itself based on a spring of course. And now I have to cut "windows" on the walls. I tried pattern on path but that would rotate the cutting shapes so that they loose their "horizontality". Then I decided to do a pattern on circle, and I started to move up the remaining 15 windows (on 16) to get my first loop correclty. I then made these 16 components a 'floor' component which I copied two times for each of theù 3 "floors" in a final component.

With history tracking, I'm very happy that I can change the shape of the initial "window" shape and that it would reflect on all of them.

Bu I'm stuck with the cutting. I need the "green" to cut the "brown". And I cannot combine the "super component" with it. Is there a trick in the timeline that would repeat the component cut to the brown component everywhere?

Or another solution? I'm sure there is. But I wonder also wich is the best one ;-)?

Thanks!

File: f3z file

Re: Combine cut a component from another complex component of components...

g-andresen — Sat, 29 Feb 2020 17:27:08 GMT

Hi,

If you would share your design we could understand what it is about.

günther

Re: Combine cut a component from another complex component of components...

laurent.chenet — Sat, 29 Feb 2020 17:56:20 GMT

Hi Günther,

It toke a while to export it 🙂

f3z file

This is what I'm trying yo repeat, cutting the wall with the window body:

Re: Combine cut a component from another complex component of components...

chrisplyler — Sun, 01 Mar 2020 15:33:29 GMT

The most convenient way to give us your file is to:

1. Save your file.

2. Export your file to your computer's hard drive as an Archive (.f3d file).

3. Attach that .f3d file to your next post.

Re: Combine cut a component from another complex component of components...

davebYYPCU — Mon, 02 Mar 2020 06:01:15 GMT

You must show all the cutter bodies in the window.

Use Modify > Combine > Cut - select all (48 cutter) Tool bodies 1st, then select target body last, I did not keep cutter bodies.

Might help....