topic Re: Problem in selecting the sketch to convert it to a body in Fusion Design, Validate & Document Forum

Problem in selecting the sketch to convert it to a body

Anonymous — Sat, 11 Apr 2020 10:11:25 GMT

Hi all guys, I ask you for help to solve this problem, I made a container using sketch and I would like to transform it into a solid body using the "Revolve" command, but when I try to select the center of the sketch nothing happens, practically it is impossible for me to select it. I checked if there were any non-junction points, however everything seems to be fine.
I attach the link of the object to understand how to solve the problem.
Thank you

Link

Re: Problem in selecting the sketch to convert it to a body

davebYYPCU — Sat, 11 Apr 2020 10:29:32 GMT

Sketch has no profile, (blue shading inside the lines) Wont work until fixed.

Your sketch has white point intersections

Your sketch is not fully constrained.

Divide and conquer shows one hole here, did not check for others.

Might help.....

Re: Problem in selecting the sketch to convert it to a body

MoshiurRashid — Sat, 11 Apr 2020 10:46:49 GMT

Thanks for posting. I've checked the sketch. It is not well defined. Even most of the elements (line, arcs) are not connected in "coincident" constrains. I could fix them one by one but that is creating dimensional inaccuracy. So, it should be done by your requirements.

Please, drag the sketch end points and those points which moves, use Coincident constrain to connect them and then check the dimensions those are required.

Re: Problem in selecting the sketch to convert it to a body

Anonymous — Sat, 11 Apr 2020 10:58:31 GMT

Forgive me, but I went to see where the hole you indicated was and I found nothing.

Link Video

Re: Problem in selecting the sketch to convert it to a body

g-andresen — Sat, 11 Apr 2020 11:36:35 GMT

Hi,

Maybe you're right.

But the unclosed vector does the same thing.

günther

Re: Problem in selecting the sketch to convert it to a body

davebYYPCU — Sat, 11 Apr 2020 11:23:54 GMT

You cant "see" it. You have not got blue shading, I do.

You can find it with temporary lines.

Re: Problem in selecting the sketch to convert it to a body

Anonymous — Sat, 11 Apr 2020 11:31:06 GMT

Ok, I saw ... but now how do I solve the problem at that point?

Re: Problem in selecting the sketch to convert it to a body

g-andresen — Sat, 11 Apr 2020 11:34:21 GMT

Hi,

did you realize what I show?

günther

Re: Problem in selecting the sketch to convert it to a body

davebYYPCU — Sat, 11 Apr 2020 11:35:05 GMT

Easy way is Sketch > Extend Tool or Sketch Trim

Almost easy way is Window Select Points and Make them coincident.

Might help....

Re: Problem in selecting the sketch to convert it to a body

Anonymous — Sat, 11 Apr 2020 11:38:02 GMT

yes yes I saw what you showed me, but I don't know how to intervene to fix the problem

Re: Problem in selecting the sketch to convert it to a body

g-andresen — Sat, 11 Apr 2020 12:15:24 GMT

Hi,

White dots are not your friends!

günther