topic Re: SVG file imports but won't extrude or Push/Pull in Fusion Design, Validate & Document Forum

SVG file imports but won't extrude or Push/Pull

Anonymous — Sun, 03 May 2020 18:31:29 GMT

I've read most of the post on SVG imports. Can't see why this is not working.

I have a simple outline graphic. A single closed path saved form illustrator as an SVG. It imports OK. I can move, scale etc. I have tried it as an outline path and a filled shape. Same issues happen:

It imports ok as a "fixed/green" outline as expected. But This will not extrude.

When I then unfix, all of the lines appear to be joined together, but I cannot select it as a sketch to extrude.
What am I missing? (tried joining lines with Coincidence but that didn't work)

Re: SVG file imports but won't extrude or Push/Pull

LeonardoBN — Sun, 03 May 2020 18:38:53 GMT

Could you share here this SVG file?

Re: SVG file imports but won't extrude or Push/Pull

Anonymous — Sun, 03 May 2020 18:43:53 GMT

How weird. I added both files in the upload

I will try again below

Re: SVG file imports but won't extrude or Push/Pull

jhackney1972 — Sun, 03 May 2020 18:51:36 GMT

The first SVG file has a break in the boundary as shown.

Re: SVG file imports but won't extrude or Push/Pull

jhackney1972 — Sun, 03 May 2020 19:03:38 GMT

I have create a Screencast to show you the method to use on this SVG sketch, or any sketch to find a break(s) in the profile.

Re: SVG file imports but won't extrude or Push/Pull

Anonymous — Sun, 03 May 2020 19:07:03 GMT

thank you SO much. Some amazing rapid response and help.

i obviously hadn’t zoomed in enough!

much appreciated

Re: SVG file imports but won't extrude or Push/Pull

jhackney1972 — Sun, 03 May 2020 19:16:44 GMT

Please mark your post as solved if you feel you have your solution.

Re: SVG file imports but won't extrude or Push/Pull

bobw1966 — Sun, 28 Feb 2021 00:04:36 GMT

I see where the break is. Since it's an SVG file how do I repair the break to extrude?

Re: SVG file imports but won't extrude or Push/Pull

jhackney1972 — Sun, 28 Feb 2021 00:08:17 GMT

You are posting a question to an old forum question. Are you using the same SVG file or a new one? If a new one, please attach it.

Re: SVG file imports but won't extrude or Push/Pull

bobw1966 — Sun, 28 Feb 2021 00:22:13 GMT

I was having the same issue and found your answer in the forum. I found I had the same problem and I would like to learn how to make this file work. If that is possible?

Thanks

Bob

Re: SVG file imports but won't extrude or Push/Pull

jhackney1972 — Sun, 28 Feb 2021 00:48:35 GMT

First of all, you should not use an old forum post, especially one that has been checked as solved, to post your question, no one will see it. I just happened to be online so it flagged me. If I were not, you probably would never have had a reply. You SVG is very different from the other one in this question, it is very obvious where the issue is. I would repair the outside curve and then offset it to make the inside curve. I am supplying my model but please take your SVG file and do the repair for yourself to learn. Please mark this answer as another solution if it satisfies your needs.

Re: SVG file imports but won't extrude or Push/Pull

bobw1966 — Sun, 28 Feb 2021 11:17:29 GMT

Thank you I see exactly how you did that and I will do it for myself to learn how to do it!!!!!

Re: SVG file imports but won't extrude or Push/Pull

da.whittaker — Sat, 23 Oct 2021 10:53:52 GMT

This was an excellent tip..thank you

Re: SVG file imports but won't extrude or Push/Pull

i555_mailbox — Thu, 05 Sep 2024 12:24:54 GMT

Спасибо большое!

[translated with Google]

Thanks a lot!