topic How Can I Debug a Failed Simulation? in Fusion Design, Validate & Document Forum

How Can I Debug a Failed Simulation?

martin_madaj — Wed, 20 May 2020 10:01:42 GMT

Hello,
I have an explicit (event) simulation with a material deletion that failed. (simulation without material deletion runs fine). The only information I can get is the study exclamation mark, Solve Details window shows nothing significant (only that the job scheduling was successful).
Is there a way to get to the output files to try to debug what's wrong?

Best regards,
Martin Madaj.

Re: How Can I Debug a Failed Simulation?

John_Holtz — Wed, 20 May 2020 12:47:30 GMT

Hi Martin,

If the output text files are returned from the failed analysis, then you should be able to access them from "Results > Inspect > Solver Data". On the dialog, change it from viewing the Solver Data to viewing the Solver Output.

If the output text files are not returned, then you would need to provide an archive of the model (.f3d) for someone in Technical Support to look at the model.

Re: How Can I Debug a Failed Simulation?

martin_madaj — Wed, 20 May 2020 14:08:17 GMT

Hi John,
it looks like it has been some strange occasional error. I gave it another try and received the results successfully.
Thank you,
Martin.