topic Re: Making a delta cnc in F360? in Fusion Design, Validate & Document Forum

Making a delta cnc in F360?

polovroemen — Sun, 24 May 2020 16:34:31 GMT

Is it possible to make this using joints in fusion 360? https://www.youtube.com/watch?v=-c87Lom9W0w

Re: Making a delta cnc in F360?

TrippyLighting — Sun, 24 May 2020 16:44:14 GMT

Yes, this has been done a number of times with 3D printers.

Re: Making a delta cnc in F360?

LeonardoBN — Sun, 24 May 2020 20:09:58 GMT

Yes, it is:

Delta Robot 3D Model Timelapse (timelapse sickness 🤢)

Re: Making a delta cnc in F360?

TrippyLighting — Sun, 24 May 2020 20:21:42 GMT

Before engaging in such an activity you might want to try a few simpler things just to make sure you understand how to organize models and assemblies in Fusion 360.

I would also not follow the practices shown in the video. He crams everything into an overly complicated sketch (mistake) then extrudes a solid body. Then he converts the body into a component, which is also a bad idea.

This is a problem with a lot of the Fusion 360 tutorials.