https://forums.autodesk.com/t5/fusion-design-validate-document/layout-grid-and-layout-grid-lock-greyed-out/m-p/9541061#M110358 <P>You are in sketch mode - actively editing a sketch - you cannot adjust the layout grid while in sketch mode.&nbsp; Exit sketch and you will be able to change the layout grid again.&nbsp; What you are seeing now is the sketch grid, not the layout grid.</P> <P>&nbsp;</P> Tue, 26 May 2020 17:39:00 GMT jeff_strater 2020-05-26T17:39:00Z https://forums.autodesk.com/t5/fusion-design-validate-document/layout-grid-and-layout-grid-lock-greyed-out/m-p/9541031#M110357 <P>Second day working with Fusion 360. Day 1 for most of the time Grids were visible and usable. Then something happened. Under Grid &amp; Snaps, Layout Grid, and Layout Grid Lock check boxes are grayed out. Yes, the Sketch Grid is checked and usable. Frustrated (not the wording my wife would use), I concluded the day defeated with no solution to be found even online.</P><P>Day 2 began with more of the same. I decided to uninstall Fusion 360 with the hope that reinstalling would reset things to default thinking of the possibility that I had inadvertently checked or unchecked some obscure setting. No such luck.</P><P>At first, although grayed out, Layout Grid Lock was checked, however, Layout Grid was unchecked. After looking at Grid &amp; Snaps under other than Design workspace, I found Lock active &amp; not grayed, I believe under Manufacture. I unchecked it. Returning to Design, Lock is now unchecked on all planes, but still grayed out. No difference with Layout Grid.</P><P>I have read many articles which at first seem to reflect this same issue but then fade into something different.</P><P>To compound the situation, the Z plane has also disappeared. Expanding the view multiple times, only the X and Y planes exist. Clicking on each on the Cube will bring the view to each of those 2, but Z does nothing.</P><P>Its seems that as I progress more things are happening. Could be my paranoia. Is there a proper solution? Did I do something stupid?</P> Tue, 26 May 2020 17:19:39 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/layout-grid-and-layout-grid-lock-greyed-out/m-p/9541031#M110357 createPNG2U 2020-05-26T17:19:39Z https://forums.autodesk.com/t5/fusion-design-validate-document/layout-grid-and-layout-grid-lock-greyed-out/m-p/9541061#M110358 <P>You are in sketch mode - actively editing a sketch - you cannot adjust the layout grid while in sketch mode.&nbsp; Exit sketch and you will be able to change the layout grid again.&nbsp; What you are seeing now is the sketch grid, not the layout grid.</P> <P>&nbsp;</P> Tue, 26 May 2020 17:39:00 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/layout-grid-and-layout-grid-lock-greyed-out/m-p/9541061#M110358 jeff_strater 2020-05-26T17:39:00Z https://forums.autodesk.com/t5/fusion-design-validate-document/layout-grid-and-layout-grid-lock-greyed-out/m-p/9541293#M110359 <P>Thank you very much.</P> Tue, 26 May 2020 19:18:43 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/layout-grid-and-layout-grid-lock-greyed-out/m-p/9541293#M110359 createPNG2U 2020-05-26T19:18:43Z