topic Re: Manually editing the parts list in Fusion Design, Validate & Document Forum

Manually editing the parts list

Craig_Crandall — Thu, 09 Jul 2020 13:31:08 GMT

I'm needing to change a qty of 1 to A/R. Is there a way yet to manually edit the BOM/Parts List? Is there a way to add stand alone BOM's/Parts Lists yet? I saw in another post that it's been on the road map for the last 3 years. Has there been any headway on this?

Re: Manually editing the parts list

olivia.struckman — Thu, 09 Jul 2020 16:46:43 GMT

Hi @Craig_Crandall - Unfortunately, the answer is 'not yet' to both manually editing parts lists and creating 'stand-alone' parts lists. The best workaround today is likely using an empty table alongside your parts list and manually entering your quantities. I recognize this is far from ideal - the good news, is we've doubled-down on improving the Drawings workspace this year, have started to show this momentum over the last couple releases, and have Parts List overrides/editing scheduled for development later this year. We'll get to Parts Only parts lists a bit later. Thank you for your patience with us as we continue to build out the Drawings toolset. I'll circle back here with updates on these once they're release-ready.

Re: Manually editing the parts list

Craig_Crandall — Thu, 09 Jul 2020 18:40:40 GMT

Thanks Olivia,

The whole empty parts list is kind of a pain since you can't copy/paste the table from drawing to drawing. Large parts lists take forever to recreate every time. I would hope there would be a better way by now.

Again, thank you and I'm looking forward to the updates!

Re: Manually editing the parts list

Craig_Crandall — Mon, 09 Nov 2020 17:34:10 GMT

@olivia.struckman

It's been about 4 months. Has there been any more headway towards making parts lists manually editable or adding the ability to copy and paste parts list?

Re: Manually editing the parts list

joshuabHTCD8 — Fri, 01 Jul 2022 18:32:27 GMT

Would love an update for this issue!

Re: Manually editing the parts list

dennis.sirrine — Wed, 07 Aug 2024 22:24:36 GMT

This was 2020 it is now 2024 and it appears to have no headway on this issue. As I am looking for answers with Fusion this seems to be the trend. It can not do the simplest task. I understand the concept of it being connected but it should also be manual edit. I starting to wonder if i picked the wrong 3d software.

Re: Manually editing the parts list

generalDTS118 — Tue, 22 Oct 2024 15:32:05 GMT

Brother. It's now 4 years. We still out here patiently waiting. 😂

Re: Manually editing the parts list

siya_classik2 — Tue, 21 Jan 2025 05:52:13 GMT

going on to the 5th yr now.

Re: Manually editing the parts list

kosmerZJYCW — Thu, 13 Mar 2025 17:20:53 GMT

Autodesk s/w developers suck!

So much for "doubling-down" on improvements:-/

Re: Manually editing the parts list

Sfricia — Tue, 20 Jan 2026 23:29:50 GMT

Insert: It's been 84 years meme.

Come on dev's. Help us out.

Re: Manually editing the parts list

jason_wee1369 — Sun, 25 Jan 2026 04:57:59 GMT

Can't even renumber it.... it's been a decade now..

Re: Manually editing the parts list

Sfricia — Wed, 06 May 2026 17:41:55 GMT

Can we get 15 minutes of a S/W engineers time to allow us to edit quantities in the parts list? Why are we paying for a service if we can't get service?