topic Re: Making entire drawing move inwards by 50mm in Fusion Design, Validate & Document Forum

Making entire drawing move inwards by 50mm

Anonymous — Thu, 27 Aug 2020 12:08:11 GMT

Hi everyone! I'm designing a van conversion and built it out in 3D space. I've realised that I need to add ~50mm into the walls for insulation & cladding. I'm a bit lost as to how I can move all of the bodies I've created towards the centre by 50mm to allow for that.

Any guidance would be greatly appreciated!

Re: Making entire drawing move inwards by 50mm

g-andresen — Thu, 27 Aug 2020 11:30:27 GMT

Hi,

Move the fixtures by 50 mm if there is no collision with other objects.

However, to give better hints, some pictures are required.

günther

Re: Making entire drawing move inwards by 50mm

Anonymous — Thu, 27 Aug 2020 12:11:07 GMT

Thanks @g-andresen. I've added a photo to give more insight.

There would be collisions where the seating bench hits the wardrobe.

I've thought about moving each body 50mm individually and then cutting away the excess, but it seemed a long winded way to go about it!

Re: Making entire drawing move inwards by 50mm

g-andresen — Thu, 27 Aug 2020 12:34:59 GMT

Hi,

@Anonymous wrote:
I've added a photo to give more insight.

~~Where?~~

günther

Just see it in #1