topic Mirror feature missing in Edit in place mode in Fusion Design, Validate & Document Forum

Mirror feature missing in Edit in place mode

gil.wery — Tue, 15 Sep 2020 18:58:46 GMT

Hello,

Maybe it's a stupid one but I couldn't get my head around it.

Why is the Mirror feature not available in Edit in place mode? I use the Mirror feature as an example but there are several other limitation in EIP (not being able to apply a material, tube function,...). Will it be for a future release?

Thank you in advance,

Gil

Re: Mirror feature missing in Edit in place mode

Rushikesh.kadam — Thu, 17 Sep 2020 10:30:53 GMT

@gil.wery Mirror option in Edit in place mode is present under create drop drown. Refer the image Mirror.png.

Regarding other missing options few of these are in pipeline.

Regards,

Rushikesh Kadam

------------------------------------------------------------------------------------------------------------

If my reply was helpful, please give a "Like" or click the "Accept as Solution" button (or both)

Re: Mirror feature missing in Edit in place mode

gil.wery — Thu, 17 Sep 2020 13:10:22 GMT

@Rushikesh.kadam thanks for taking some time to clear this up.

Yes it is available in associative mode but once you are in the non-associative mode, it goes away.

Is there a specific reason for this? I mean it adds 2 extra saves and a lot of clicks just to be able to mirror something while in context.

Thanks in advance,

Gil

Re: Mirror feature missing in Edit in place mode

Rushikesh.kadam — Thu, 17 Sep 2020 16:44:46 GMT

@gil.wery For non associative mode, active the local context present under Assembly Contexts folder after EIP. Now there will be mirror option under create drop-down. Refer image Mirror_Non_Associative.png

Regards,

Rushikesh Kadam

------------------------------------------------------------------------------------------------------------

If my reply was helpful, please give a "Like" or click the "Accept as Solution" button (or both)

Re: Mirror feature missing in Edit in place mode

gil.wery — Thu, 17 Sep 2020 20:28:26 GMT

@Rushikesh.kadam , thanks for the quick help! 😊