topic Re: Smooth progression in height? 🤔 in Fusion Design, Validate & Document Forum

Smooth progression in height? 🤔

jvlob — Sun, 20 Sep 2020 11:23:20 GMT

Hello!

I'm trying to design in Fusion 360 a piece that I consider quite complex for my knowledge of designing in Fusion.

Here are some pictures of the piece I'm talking about:

It is one of those Brita jar's lid.

So, in Fusion 360 I've been able to get the triangular shape of the piece, but no more than that really:

The height I set in the piece is the maximum one, and I'm looking for a way to progress? the height from the highest part (the back of the piece) to the lowest (the front), as you can see in the side picture of the original piece.

I'm quite lost at this point, so I will highly appreciate any help or tips on how to achieve this.

Kind regards,
Lobo.

Re: Smooth progression in height? 🤔

TheCADWhisperer — Sun, 20 Sep 2020 13:18:18 GMT

Can you place this part in it's assembled position (with the rest of the mating parts) and post another image of the complete assembly? I think that will give some clues on how to model the geometry.

Re: Smooth progression in height? 🤔

jvlob — Sun, 20 Sep 2020 13:25:29 GMT

Sadly I don't have the rest of the jar with me, but I was able to find this image on the internet:

There you can see where the small lid goes in the front.
I hope it helps.

Thank you!

Re: Smooth progression in height? 🤔

g-andresen — Sun, 20 Sep 2020 16:16:08 GMT

Hi,

here´s a basic shape

günther

Re: Smooth progression in height? 🤔

jvlob — Mon, 21 Sep 2020 07:32:55 GMT

Thanks a lot @g-andresen

I'll follow your screencast and try to apply it to my design. Let's see what I can do!! 😄