topic PG Cable gland thread XML file in Fusion API and Scripts Forum

PG Cable gland thread XML file

vanhal.c — Sun, 17 Jul 2022 10:38:54 GMT

I have made and tested an XML file making Cable gland threads. sizes PG7 to PG48 are in the file available.

Use this video With thanks to the author to find where to paste the file and restart fusion to make PG Cable gland Threads.

Video where to find the file location:

https://knowledge.autodesk.com/community/screencast/2789570a-35ce-4baf-828f-c46645cff6ff

Re: PG Cable gland thread XML file

asosaYPFJQ — Thu, 15 Jun 2023 02:12:32 GMT

I was on this other site

https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/Custom-Threads-in-Fusion-360.html

looking on how to create my own xml file for PG glands. I made my own PG7 tweaking some imperial template and just when I was about to create the PG9 I thought "what if somebody did this before?". So I found this post, used your XML and all is good, at least with the PG9 I printed so far.

I can confirm you respected the 80º thread angle of the PG specification.

I'm still going to create other XML configurations for custom pieces but want to thank you for sharing Let me know if I can help you with something. I owe you a couple of hours.

Re: PG Cable gland thread XML file

ko_attila — Fri, 29 Nov 2024 10:29:44 GMT

Thank you! Big help

Re: PG Cable gland thread XML file

kdk_warhead — Mon, 27 Oct 2025 20:07:20 GMT

Thanks!

I didn’t need it in the end but might be useful some other time.

I appreciate your work on this and for sharing it.

Re: PG Cable gland thread XML file

washleyMB2KW — Tue, 23 Jun 2026 01:31:53 GMT

This saved me a lot of hassle. Thanks so much for posting it.