https://forums.autodesk.com/t5/flexsim-forum/reversibleconveyor/m-p/13651677#M96363 <P>In the model I attached, there are 10 boxes sent through the conveyor belt. When the operation is complete, the 10 boxes are sent back through the same conveyor belt. But my model only returns 1 box. Please advise how to do this.</P> Tue, 27 May 2025 13:01:32 GMT jukkridsut 2025-05-27T13:01:32Z https://forums.autodesk.com/t5/flexsim-forum/reversibleconveyor/m-p/13651677#M96363 <P>In the model I attached, there are 10 boxes sent through the conveyor belt. When the operation is complete, the 10 boxes are sent back through the same conveyor belt. But my model only returns 1 box. Please advise how to do this.</P> Tue, 27 May 2025 13:01:32 GMT https://forums.autodesk.com/t5/flexsim-forum/reversibleconveyor/m-p/13651677#M96363 jukkridsut 2025-05-27T13:01:32Z https://forums.autodesk.com/t5/flexsim-forum/reversibleconveyor/m-p/13652378#M96370 <P>First, you should not be calling function_s(conv, "switchDirection") during a simulation run. This is meant for defining the geometric properties of the conveyor, which should not change during the simulation. Instead, you should set the <A href="https://docs.flexsim.com/en/25.1/Reference/CodingInFlexSim/FlexScriptAPIReference/Conveyor/Conveyor.html#Property-targetSpeed" target="_blank" rel="noopener">targetSpeed</A> value of the Conveyor object in flexscript. This is intended for dynamic changes during the simulation run.&nbsp;</P> <P>&nbsp;</P> <P>Second, it looks like there are issues with the entry transfer object not interpreting entry proper entry availability when the conveyor is in reversed mode. To get around that, I added a small single direction conveyor that feeds into the reversible conveyor. This seems to fix the issue.</P> Tue, 27 May 2025 20:55:10 GMT https://forums.autodesk.com/t5/flexsim-forum/reversibleconveyor/m-p/13652378#M96370 anthony_johnsonT83CM 2025-05-27T20:55:10Z