topic Re: reopen PLC model throw out Error in FlexSim Forum

reopen PLC model throw out Error

bo_wang — Fri, 08 May 2020 09:43:37 GMT

[ FlexSim 20.0.3 ]

Hi,

When I finished FlexSim communicating with the external simulator and did not uncheck activation, I closed the model. Error is reported probabilisticly when the model is opened again, and the conveyor belt is no longer displayed.

I've tried a lot of related solutions to bounce errors. Is there something wrong with my operating system or something wrong with the driver?Has anyone ever had the same problem?

reopen PLC model throw out Error(inactived)V20.0.2.fsm

reopen PLC model throw out Error(actived)V20.0.2.fsm

Re: reopen PLC model throw out Error

matt_long — Fri, 08 May 2020 13:55:50 GMT

@Bob.Wang I'm not able to replicate your issue. I will note that I'm running FlexSim 20.0.5.Are you running in 32-bit or 64-bit? What windows version are you on?

Re: reopen PLC model throw out Error

bo_wang — Fri, 08 May 2020 14:27:53 GMT

@Matt Long Thanks for your reply.my notebook runs win10 64bit 1903. I had tested FlexSim2020.0.3 and FlexSim2020.1.1.Both versions have the same problem.So I guess it was wrong with my OS.

Re: reopen PLC model throw out Error

matt_long — Fri, 08 May 2020 14:30:12 GMT

There may be a drawing issue with you graphics driver. Take a look at this Graphics Compatability page for some ways to solve that. Hopefully one of them gets it fixed for you.

Re: reopen PLC model throw out Error

benjamin_w2 — Mon, 18 May 2020 19:44:26 GMT

Hi @Bob.Wang,

Was Matt's comment helpful to you? If not, how else can we help?