topic Combiner loads two items that are ready for multiple entries in FlexSim Forum

Combiner loads two items that are ready for multiple entries

omar_aguilera_rico — Sun, 28 Oct 2018 22:37:42 GMT

[ FlexSim 18.2.2 ]

Hi. I have the following problem that I have not yet been able to solve. The combiner receives items from the Green Processor, and Queue. The conveyor is used when the combiner is processing, so that the items leaving the green processor are sent to the conveyor as a WIP, but if the combiner ends and matches the unit on the green processor, the item can be sent directly to the combiner. . How can I make the Combiner only load two item, one from the queue and the second, either from the Processor or the Conveyor, which is ready first? The first entry to the combiner is the Queue because they are processed faster in the red processor.

logica-3.fsm

Re: Combiner loads two items that are ready for multiple entries

gilbertjerald1993 — Mon, 29 Oct 2018 10:05:39 GMT

@Omar Aguilera Rico

As per your constraint, I have created a logic in the process flow that allows only two item to enter into the combiner, first one from Queue2 and the second one from either processor or from the conveyor.

I have attached the model for your reference have a look at it

suport-logica.fsm

If the referred model does not meet your logic let me know.

Thanks

Re: Combiner loads two items that are ready for multiple entries

gilbertjerald1993 — Wed, 31 Oct 2018 05:26:00 GMT

@Omar Aguilera Rico

Hi,

Is this model satisfied the constraint that you are looking for?

Thanks