topic Re: How to put imported image in the bottom layer? in FlexSim Forum

How to put imported image in the bottom layer?

jyhjeng_d2 — Fri, 24 Feb 2023 07:04:46 GMT

[ FlexSim 22.0.1 ]

Hi:

I imported an image and on the top I constructed some objects and made connections among them. However, some of the connection lines are hidden by the image. How do I make the connection appear? It is clearly if I can put the image in the bottom layer, it will do the job. But how?

Here below is my current graph. The connections are hidden.

What I expect is below.

Here is my flexsim file.

Primer_2-1D.fsm

Re: How to put imported image in the bottom layer?

moehlmann_fe — Fri, 24 Feb 2023 07:23:42 GMT

Move the background a tiny bit below the floor. In the picture I actually used 0.005 which gets rounded due to the default decimal precision of 2. A larger value might lead to the background getting blocked by the floor at certain angles. (If you don't need it you can also just delete the floor, so that wouldn't be a problem).

Re: How to put imported image in the bottom layer?

jyhjeng_d2 — Sun, 26 Feb 2023 12:42:49 GMT

It works. Thanks