https://forums.autodesk.com/t5/flexsim-forum/set-location-on-processor-with-custom-3d-shape/m-p/13536610#M44287 <P><I>[ FlexSim 20.0.2 ]</I></P><P>When a processor has a custom 3D shape, the Set Location will not move the entering flowitem along the X axis. Y and Z function as expected, but the flowitem is stuck on the 3D shape's edge. It does work with the default processor shape. Is there some setting to change that will allow this movement? I want to place the flowitem on the workstation center.</P> <P><A id="25861" href="https://answers.flexsim.com/storage/attachments/25861-setlocation-xfixed.fsm">setlocation-xfixed.fsm</A></P> Mon, 24 Feb 2020 21:17:28 GMT c_adam_collins 2020-02-24T21:17:28Z https://forums.autodesk.com/t5/flexsim-forum/set-location-on-processor-with-custom-3d-shape/m-p/13536610#M44287 <P><I>[ FlexSim 20.0.2 ]</I></P><P>When a processor has a custom 3D shape, the Set Location will not move the entering flowitem along the X axis. Y and Z function as expected, but the flowitem is stuck on the 3D shape's edge. It does work with the default processor shape. Is there some setting to change that will allow this movement? I want to place the flowitem on the workstation center.</P> <P><A id="25861" href="https://answers.flexsim.com/storage/attachments/25861-setlocation-xfixed.fsm">setlocation-xfixed.fsm</A></P> Mon, 24 Feb 2020 21:17:28 GMT https://forums.autodesk.com/t5/flexsim-forum/set-location-on-processor-with-custom-3d-shape/m-p/13536610#M44287 c_adam_collins 2020-02-24T21:17:28Z https://forums.autodesk.com/t5/flexsim-forum/set-location-on-processor-with-custom-3d-shape/m-p/13536611#M44288 <P>Convey Item Across Processor Length needs to be unchecked and it will work.</P> Mon, 24 Feb 2020 21:23:59 GMT https://forums.autodesk.com/t5/flexsim-forum/set-location-on-processor-with-custom-3d-shape/m-p/13536611#M44288 c_adam_collins 2020-02-24T21:23:59Z