topic Re: Processor Time with Tolerance Time in FlexSim Forum

Processor Time with Tolerance Time

TalHzf — Fri, 13 Jan 2023 14:08:42 GMT

[ FlexSim 22.2.0 ]

Hi All,

I want to ask if I can with Flexsim define the Time on a processor with a tolerance (for example +5% or -5% for the already given time.

Thank you all.

jason_lightfoot_adsk — Fri, 13 Jan 2023 14:12:53 GMT

double ptime=50;
return uniform(0.95*ptime,1.05*ptime);

If you can't assume uniform, you'll need some other distribution for which you'll need to figure out the parameters.

TalHzf — Fri, 13 Jan 2023 14:27:15 GMT

But I don't know where to enter your instructions.

Thanks

jason_lightfoot_adsk — Fri, 13 Jan 2023 14:47:35 GMT

In the process time trigger of the processor.

Don't enter it exactly as it is - you need to assign ptime the value you need - which could be item based.

TalHzf — Fri, 13 Jan 2023 14:58:23 GMT

In the trigger i find On setup Finish, Process finish, on Entry??

Which one should I choose

Thank you

Jeanette_Fullmer — Fri, 13 Jan 2023 17:05:57 GMT

I believe @Jason Lightfoot intended for you to use the process time field.

TalHzf — Tue, 17 Jan 2023 08:05:01 GMT

Thank you I understand it.