topic Re: Driving a Forklift in VR mode in FlexSim Forum

Driving a Forklift in VR mode

sri_vikas_k — Mon, 09 Jan 2023 07:23:58 GMT

[ FlexSim 23.0.1 ]

Hi @Phil BoBo

I have watched a video in YouTube, Where the Transporter is being driven in VR mode. Can I get a demo model of it.

Please watch the link below for detailing.

https://youtu.be/_xhFXM29nIA

Re: Driving a Forklift in VR mode

ralf_gruber — Mon, 09 Jan 2023 12:31:58 GMT

This model has been built by @Felix Möhlmann in Germany. But he cannot see this post because of you setting it to private.

Re: Driving a Forklift in VR mode

sri_vikas_k — Tue, 10 Jan 2023 01:51:22 GMT

Hi @Felix Möhlmann
Could you please send me the demo model.

Re: Driving a Forklift in VR mode

moehlmann_fe — Tue, 10 Jan 2023 08:13:41 GMT

Hi,

we are currently working on updating the model to work with version 23.0 and still need to test some things and update the documentation.

For now I can attach the original model build in version 20.0. I will update the post once the new version is finished.

VR_Forklift_ProSim.zip

Re: Driving a Forklift in VR mode

sri_vikas_k — Tue, 10 Jan 2023 08:40:15 GMT

Thanks for the response @Felix Möhlmann

Re: Driving a Forklift in VR mode

moehlmann_fe — Fri, 13 Jan 2023 07:27:29 GMT

Here is the updated model for the 23.0 version. Instead of replacing the "defaultview" file, you now have to place a module folder inside the respective folder in the installation directory (which will then replace the code which was previously done by the "defaultview" file).

VR_Forklift_23_0.zip

Re: Driving a Forklift in VR mode

sri_vikas_k — Fri, 13 Jan 2023 07:46:59 GMT

Thanks @Felix Möhlmann

Re: Driving a Forklift in VR mode

sri_vikas_k — Tue, 18 Apr 2023 04:52:14 GMT

Hi @Felix Möhlmann

When I check the model in Vive Pro I am not able to make interaction with the pommels.

Re: Driving a Forklift in VR mode

moehlmann_fe — Tue, 18 Apr 2023 07:11:51 GMT

I don't know why this would be the case. According to the command documentation I would suspect that the grip-trigger should return either 0 or 1 and thus fulfill the conditions in the code that are set to >= 0.5 and < 0.5 for the analog input of the Rift.

Maybe try printing the stick() output to the console to check if the button presses are actually registered.

Re: Driving a Forklift in VR mode

philboboADSK — Tue, 18 Apr 2023 13:52:03 GMT

Make sure you are pushing the grip button and not the trigger button:

This model uses the grip button for interacting with the levers.

About the VIVE controllers

Re: Driving a Forklift in VR mode

sri_vikas_k — Mon, 22 May 2023 04:46:50 GMT

Hi @Felix Möhlmann

Hope you are doing good.

You suggested to print the stick() output to console to check if the buttom presses are actually registered. How to do this?

I have been checking with grip trigger button only as @Phil BoBo said.

Re: Driving a Forklift in VR mode

jason_lightfoot_adsk — Mon, 22 May 2023 11:36:44 GMT

Run this to edit the code for the open perspective view:

applicationcommand("codeeditor", views().find("active>Documents/Perspective/1+/~>eventfunctions/TouchInput"));

Re: Driving a Forklift in VR mode

sri_vikas_k — Tue, 23 May 2023 04:38:20 GMT

Hi @Felix Möhlmann and @Jason Lightfoot

When I run the code touch input code window popped up.

In that window there is no grip STICK_VR_GRIP_TRIGGER was not registered.

Did I observe correct?

Re: Driving a Forklift in VR mode

jason_lightfoot_adsk — Tue, 23 May 2023 12:04:43 GMT

Sorry - I pointed you to the usual touch input location.

You can add something similar to the following script to the user commands

ModelOnPreDraw,
getHandCollisionSphere
getHandGripPosition

#define LEFT 0
#define RIGHT 1
print(stick(RIGHT, STICK_VR_GRIP_TRIGGER));

Re: Driving a Forklift in VR mode

sri_vikas_k — Tue, 06 Jun 2023 06:26:43 GMT

@Jason Lightfoot

I have added those lines to the following user commands:

1. ModelOnPreDraw

2. getHandCollisionSphere

3. getHandGripPosition

Though I was not able to make interaction with the model..

Re: Driving a Forklift in VR mode

jason_lightfoot_adsk — Tue, 06 Jun 2023 06:40:01 GMT

What grip trigger values are you getting?

Re: Driving a Forklift in VR mode

sri_vikas_k — Tue, 06 Jun 2023 07:44:16 GMT

When I debug it, it is showing like this for me!

Re: Driving a Forklift in VR mode

jason_lightfoot_adsk — Tue, 06 Jun 2023 08:12:40 GMT

The idea behind the print statement was to press the grip and look at the output console to see what values are being registered.

Re: Driving a Forklift in VR mode

moehlmann_fe — Tue, 06 Jun 2023 08:26:41 GMT

In order to see the valuse of print() you have to open the output console. Then press some buttons on the controllers and see if any output appears.

Re: Driving a Forklift in VR mode

sri_vikas_k — Wed, 07 Jun 2023 11:28:04 GMT

Hi @Felix Möhlmann & @Jason Lightfoot

I tried printing the values on Output console, it is coming like this from me!

I have added those lines to the following codes,

1. ModelOnPreDraw

2. getHandCollisionSphere

3. getHandGripPosition

and interacted the controllers with the stick and no value came in the output console.