topic Re: task sequence-load-unload in FlexSim Forum

task sequence-load-unload

yoni_a — Tue, 29 May 2018 19:52:24 GMT

[ FlexSim 18.1.1 ]

I have a once upstream processor connected to 2 downstream processor, two operators move the completed parts from the upstream processor to the downstream processors, and then they follow a task sequence in the downstream processors, how can I tell the upstream processor to use the task subflow-task sequence I created for each individual operator to move the items to independent stations, each operator work on his own in a separate station(processor)

Re: task sequence-load-unload

joshua_s — Tue, 29 May 2018 19:55:21 GMT

Can you upload your model or at least your task sequence for us to have a reference?

Re: task sequence-load-unload

yoni_a — Tue, 29 May 2018 21:19:00 GMT

capture1.png see image @Joshua S, file is too big

Re: task sequence-load-unload

joshua_s — Tue, 29 May 2018 21:42:05 GMT

How are you obtaining the processor you are assigning work to? you can use the reference code:

current.centerObjects[1]

and replace current with the processor you have assigned work to. This references the operator connected to the processor.

Re: task sequence-load-unload

yoni_a — Wed, 30 May 2018 13:01:11 GMT

load-unload-task-sequence.fsm

see attached example, @Joshua S , items must be unloaded from welder by operators to two downstream masking stations, do the task sequence and move to the last station to clean the flow item

Re: task sequence-load-unload

joshua_s — Wed, 30 May 2018 15:26:12 GMT

Is this flow kind of what you are looking for?12164-load-unload-task-sequence-change.fsm

Re: task sequence-load-unload

joshua_s — Wed, 06 Jun 2018 21:13:55 GMT

@yoni A Did this work for you?

Re: task sequence-load-unload

yoni_a — Wed, 06 Jun 2018 21:15:31 GMT

yes it did @Joshua S