topic Combiner distorting objects in FlexSim Forum

Combiner distorting objects

10Dulkar — Mon, 03 May 2021 17:40:56 GMT

[ FlexSim 19.2.4 ]

Objects are getting misplaced on the other object after getting assembled at the Combiner. Below is the snapshot from the one basic model and there is another one from my project

Re: Combiner distorting objects

jason_lightfoot_adsk — Mon, 03 May 2021 19:22:56 GMT

Usually you need to swap the port - have the container come in on port 1.

Re: Combiner distorting objects

Jeanette_Fullmer — Thu, 06 May 2021 03:10:58 GMT

Hi @sachin T3, was jason.lightfoot's answer helpful? If so, please click the red "Accept" button at the bottom of their answer. Or if you still have questions, add a comment and we'll continue the conversation.

If we haven't heard back from you within 3 business days we'll auto-accept an answer, but you can always unaccept and comment back to reopen your question.

Re: Combiner distorting objects

10Dulkar — Mon, 10 May 2021 21:04:45 GMT

Sorry for the late reply. The answer did not solve anything. the problem still persists.

Re: Combiner distorting objects

joerg_vogel_HsH — Mon, 10 May 2021 21:08:13 GMT

The items entering through port port 1 must be of type pallet or tote. Or it is any other item which has its packaging feature activated.

Re: Combiner distorting objects

eric_m3 — Mon, 17 May 2021 20:21:48 GMT

Hi @sachin T3, it's hard to know how to help without looking at your model since switching the port seems to solve the problem on our end.

You can reply with an example model if you'd like, or if your model is proprietary, it can be posted as a private question visible only to FlexSim U.S. support staff. You can also contact your local FlexSim distributor for phone or email help.