topic Re: Invisible Conveyor causing corrupted model in FlexSim Forum

Invisible Conveyor causing corrupted model

guilherme_g9 — Thu, 02 Jun 2022 02:22:59 GMT

[ FlexSim 22.1.2 ]

I have read about this problem on another post but the suggested answer was to check the computer configurations. I have checked all the graphic and other requirements and believe that i match all of them. Also, i have been using FlexSim normally until yesterday when i encountered this problem, so why would it suddenly stop working.
Config.png

Re: Invisible Conveyor causing corrupted model

jason_lightfoot_adsk — Thu, 02 Jun 2022 11:13:25 GMT

Do other models draw correctly? An earlier version? Can you post the model? It may actually have been corrupted in which case the simplest solution is to go back to a previous version.

Re: Invisible Conveyor causing corrupted model

guilherme_g9 — Thu, 02 Jun 2022 11:54:02 GMT

PFC.fsm Yes other models draw correctly, i remember that i started the project on version 22.1.1, then i had the problem with the corrupted project and tried to update to version 22.1.2 but still didn't work.

Re: Invisible Conveyor causing corrupted model

jason_lightfoot_adsk — Thu, 02 Jun 2022 12:04:04 GMT

In that model you're referring to 'current' as the triggering object in a General Process Flow - which is incorrect, you can only detect entry on current in an Object Process Flow.

Re: Invisible Conveyor causing corrupted model

guilherme_g9 — Thu, 02 Jun 2022 12:07:18 GMT

Your talking about the error, there is an error because i can't insert a conveyor. There was one yesterday but someone helped me and removed it so i can use the project again. But i wan't to insert a new conveyor. The problem is that my conveyor is invisible and keeps corrupting the project.

Re: Invisible Conveyor causing corrupted model

jason_lightfoot_adsk — Thu, 02 Jun 2022 12:08:05 GMT

Why do you think it's corrupted? There is no hidden conveyor in the model either.

Re: Invisible Conveyor causing corrupted model

jason_lightfoot_adsk — Thu, 02 Jun 2022 12:14:38 GMT

I deleted the ConveyorSystem object in the model which then allows the render mode to be drawn for new conveyors.

pfc_jl.fsm

Re: Invisible Conveyor causing corrupted model

guilherme_g9 — Thu, 02 Jun 2022 12:22:01 GMT

It worked, thanks!

Re: Invisible Conveyor causing corrupted model

guilherme_g9 — Thu, 02 Jun 2022 13:56:39 GMT

@Jason Lightfoot my simulation won't run and it doesn't appear any error to check for.

PFC.fsm Here is the updated model.

Re: Invisible Conveyor causing corrupted model

jason_lightfoot_adsk — Thu, 02 Jun 2022 14:02:17 GMT

There's no error - you just haven't set it up to do anything. It creates two tokens that try to pull a base and top and the two sources create those objects but they have nowhere to go - they're not connected to the queue with an output.