topic Why machine still have output even in downtime schedule? in FlexSim Forum

Why machine still have output even in downtime schedule?

fauzan_r — Wed, 01 Jun 2022 10:58:02 GMT

[ FlexSim 22.1.1 ]

So i use processor as the machine, total day 18 and 19 are supposed to be downtime schedule for the machine. I was wondering why total day 19 has total output 1 when it should be a downtime schedule. I've tried changing the process time but it still have the same issue, anyone know why?

Object	Throughput	Throughput~2	Day	Total Day	Total ouput
6/13/2022 8:00	Inspection Area	0	13	13	255
6/13/2022 9:00	Inspection Area	0	13	14	267
6/13/2022 10:00	Inspection Area	32	13	15	260
6/13/2022 11:00	Inspection Area	32	13	16	257
6/13/2022 12:00	Inspection Area	33	13	17	256
6/13/2022 13:00	Inspection Area	0	13	18	0
6/13/2022 14:00	Inspection Area	31	13	19	1
6/13/2022 15:00	Inspection Area	32	13	20	260
6/13/2022 16:00	Inspection Area	31	13	21	260
6/13/2022 17:00	Inspection Area	31	13	22	259
6/13/2022 18:00	Inspection Area	33	13	23	269
6/13/2022 19:00	Inspection Area	0	13	24	264
6/13/2022 20:00	Inspection Area	0	13	25	0
6/13/2022 21:00	Inspection Area	0	13	26	0
6/13/2022 22:00	Inspection Area	0	13	27	256
6/13/2022 23:00	Inspection Area	0	13	28	263
6/14/2022 0:00	Inspection Area	0	14	29	259
6/14/2022 1:00	Inspection Area	0	14	30	259
6/14/2022 2:00	Inspection Area	0	14	1	265
6/14/2022 3:00	Inspection Area	0	14	2	0

6/19/2022 0:00	Inspection Area	1	19
6/19/2022 1:00	Inspection Area	0	19
6/19/2022 2:00	Inspection Area	0	19
6/19/2022 3:00	Inspection Area	0	19
6/19/2022 4:00	Inspection Area	0	19
6/19/2022 5:00	Inspection Area	0	19
6/19/2022 6:00	Inspection Area	0	19
6/19/2022 7:00	Inspection Area	0	19
6/19/2022 8:00	Inspection Area	0	19
6/19/2022 9:00	Inspection Area	0	19
6/19/2022 10:00	Inspection Area	0	19
6/19/2022 11:00	Inspection Area	0	19
6/19/2022 12:00	Inspection Area	0	19
6/19/2022 13:00	Inspection Area	0	19
6/19/2022 14:00	Inspection Area	0	19
6/19/2022 15:00	Inspection Area	0	19
6/19/2022 16:00	Inspection Area	0	19
6/19/2022 17:00	Inspection Area	0	19
6/19/2022 18:00	Inspection Area	0	19
6/19/2022 19:00	Inspection Area	0	19
6/19/2022 20:00	Inspection Area	0	19

Re: Why machine still have output even in downtime schedule?

kavika_faleumu — Wed, 01 Jun 2022 10:59:02 GMT

Hi @Fauzan R,

It's hard to know how to help without looking at your model. To receive a more accurate solution, please post your model or a sample model that demonstrates your question.

Proprietary models can be posted as a private question visible only to FlexSim U.S. support staff. You can also contact your local FlexSim distributor for phone or email help.

Re: Why machine still have output even in downtime schedule?

fauzan_r — Wed, 01 Jun 2022 11:00:02 GMT

Penambahan Jam Kerja.fsm

Here's my model, the problem is with the output on the inspection area on day 19

Re: Why machine still have output even in downtime schedule?

kavika_faleumu — Wed, 01 Jun 2022 15:56:35 GMT

Hey @Fauzan R, it seems that your model Time Tables had a 1 minute gap on Sunday and Monday between 11:59:00 PM - 12:00:00 AM the next day. I changed it so that gap was gone and ran the model a few times to ensure that there were no outputs getting through in that 1 minute, so now the duration should be a full day.

solution.fsm

Re: Why machine still have output even in downtime schedule?

fauzan_r — Wed, 01 Jun 2022 16:55:03 GMT

ohh i thought the problem was with the process time, thank you for your time sir

Re: Why machine still have output even in downtime schedule?

kavika_faleumu — Wed, 01 Jun 2022 16:58:02 GMT

No problem, glad I could help!