topic Attach AGV train links AGV forever in FlexSim Forum

Attach AGV train links AGV forever

julio_r — Mon, 07 Nov 2022 19:03:39 GMT

[ FlexSim 22.2.2 ]

In this model I use the couple train option in an AGV but when I do a reset the AGVs are still couple.

I checked the tree and the AGVs are not one inside of the other.

Is there a way to uncouple the AGVs on reset? is this a spected behavior?

Re: Attach AGV train links AGV forever

julio_r — Tue, 08 Nov 2022 03:06:53 GMT

Forgot the example:

GIS Trenes Prueba de concepto.fsm

Re: Attach AGV train links AGV forever

joerg_vogel_HsH — Tue, 08 Nov 2022 06:39:09 GMT

I would never link AGVs in their module. I would have a master and only trailers. If I connect more trains, then I attach only trailers and move a formerly AGV into a trailer. By this a train keeps his structure and I can split it up later again into several trains again.

Re: Attach AGV train links AGV forever

sri_vikas_k — Tue, 08 Nov 2022 06:44:39 GMT

Hi @Julio R

To achieve your requirement, You can give "Traveller AGV" connection to both Train2 and Train3 with respective to the CP they have to stand when reset.

After connecting reset and run the model.