topic Task 1.4 - Link the Models : Errors in the Model (Attached) in FlexSim Forum

Task 1.4 - Link the Models : Errors in the Model (Attached)

kj311 — Thu, 12 May 2022 17:11:14 GMT

[ FlexSim 22.0.0 ]

Task 1.4 - Link the Models.fsm https://docs.flexsim.com/en/22.0/Tutorials/FlexSimBasics/1-4LinkModels/1-4LinkModels.html

I've been following the instructions for linking models, but can't get the dashboards to work. The statistics collector is not coming up automatically - I've also tried creating the charts per the instructions https://docs.flexsim.com/en/22.0/Tutorials/FlexSimBasics/1-3BuildProcessFlow/1-3BuildProcessFlow.html

If someone could take a look at this (MODEL ATTACHED) and send me back to me with the corrections that would be greatly appreciated. Thank you!

Re: Task 1.4 - Link the Models : Errors in the Model (Attached)

moehlmann_fe — Fri, 13 May 2022 06:09:52 GMT

It seems you missed points 7-11 from Step 1 (Remove the Flow Logic in the 3D Model).

The waiting line still pushes the customers to a list and service desk 1 is still pulling from it. The processor and process flow logic interfere with each other. The process flow might move the customer out of the processor before the process has finished. When it does later, FlexSim will throw an error because the involved object is no longer available when the finish event fires.

Service Desk 2 is also missing from the respective group which is why it isn't used currently.

task-14-link-the-models_1.fsm

Re: Task 1.4 - Link the Models : Errors in the Model (Attached)

kj311 — Fri, 13 May 2022 13:19:42 GMT

thank you so much, Felix!