Model freezes due to custom code

robert_f2 — Thu, 28 May 2020 23:06:16 GMT

[ FlexSim 19.1.2 ]

Hello,

I am using a combiner to palletize parts in specific load sizes and a separator to then separate the parts from the pallet. Queue1 and Queue79 have custom code in their triggers and when a different part type enters these queues, the model freezes and the code pops up. All I have to do is then click Continue and the model resumes but is there any way to prevent this pause?

Also, I need to add 2700 seconds of setup time between when different part types enter the conveyors so that the operators have time to make changes to the conveyors but I am having trouble with this.

Thanks for any help!

Re: Model freezes due to custom code

benjamin_w2 — Thu, 28 May 2020 23:15:19 GMT

Hi @Robert F2,

You have a breakpoint in your code on line 34 of your entry trigger. It is the red shape on the left side of the code. Simply click it to remove it and your model should run fine.

As for your next question, try posting it as a different question. In general, it is best practice to only ask one question per post.

topic Re: Model freezes due to custom code in FlexSim Forum

Model freezes due to custom code

Re: Model freezes due to custom code