topic Re: AGV path in a rotated plane don't work in FlexSim Forum

AGV path in a rotated plane don't work

patrick_zweekhorst — Tue, 23 Jun 2020 13:19:06 GMT

[ FlexSim 20.1.3 ]

Hi,

I have some problems with moving AGV paths into planes. As I understood it this should be possible (and make copy pasting AGV path a lot easier). When you move some paths into a plane and move the plane around the path transfers don’t move along with it:

This is solved after pressing “Refresh path links”, so this is not such a big problem.

The real problem is when you move the paths in a plane that is rotated, if you do that everything goes wrong:

Is moving AGV paths in a rotated shape not supported or is this a bug that should be fixed?
Any work around for this would also be appreciated.

Thank you for your time

Re: AGV path in a rotated plane don't work

joerg_vogel_HsH — Tue, 23 Jun 2020 21:18:54 GMT

I have done this in a different version in a different order.

please see this here. Plane and path system have the same orientation. Then I move the paths, control points and navigator into the plane. Then I rotate the plane and the vehicle travels on the paths.

Re: AGV path in a rotated plane don't work

patrick_zweekhorst — Wed, 24 Jun 2020 06:41:27 GMT

Hi @Jörg Vogel, Thanks for the reply, I noted that when testing before. However I already have a plane in my model which is rotated. I want to move the AGV paths into that plane before copying the plane.

Re: AGV path in a rotated plane don't work

philboboADSK — Wed, 24 Jun 2020 15:14:40 GMT

This is a bug. I'll add a case to the dev list. Thanks.