https://forums.autodesk.com/t5/featurecam-forum/post-process-for-haas-verticals/m-p/12736978#M96 <P>Thanks, through a little navigation we found it. Needs some work of course.&nbsp;</P> Fri, 26 Apr 2024 19:34:47 GMT mboozer4U9B9 2024-04-26T19:34:47Z https://forums.autodesk.com/t5/featurecam-forum/post-process-for-haas-verticals/m-p/12736656#M94 <P>We just purchased our first seat and we have zero posts. Not even the generic ones. Is this normal for FeatureCam</P> Fri, 26 Apr 2024 17:01:46 GMT https://forums.autodesk.com/t5/featurecam-forum/post-process-for-haas-verticals/m-p/12736656#M94 mboozer4U9B9 2024-04-26T17:01:46Z https://forums.autodesk.com/t5/featurecam-forum/post-process-for-haas-verticals/m-p/12736917#M95 <P>Go to your C drive and follow this path:</P><P>C:\Program Files\Autodesk\FeatureCAM 2024\Posts</P><P>There is a Haas post in the Mill - 3 axis folder.</P> Fri, 26 Apr 2024 19:00:19 GMT https://forums.autodesk.com/t5/featurecam-forum/post-process-for-haas-verticals/m-p/12736917#M95 randy_brojanac 2024-04-26T19:00:19Z https://forums.autodesk.com/t5/featurecam-forum/post-process-for-haas-verticals/m-p/12736978#M96 <P>Thanks, through a little navigation we found it. Needs some work of course.&nbsp;</P> Fri, 26 Apr 2024 19:34:47 GMT https://forums.autodesk.com/t5/featurecam-forum/post-process-for-haas-verticals/m-p/12736978#M96 mboozer4U9B9 2024-04-26T19:34:47Z https://forums.autodesk.com/t5/featurecam-forum/post-process-for-haas-verticals/m-p/12772046#M97 <P>Thanks for helping me out as well.</P> Tue, 14 May 2024 12:02:23 GMT https://forums.autodesk.com/t5/featurecam-forum/post-process-for-haas-verticals/m-p/12772046#M97 simon_peters2006 2024-05-14T12:02:23Z