https://forums.autodesk.com/t5/featurecam-forum/featurecam-2017-post-processor-setup/m-p/7633468#M5705 <P>Hi, just after some advice on how to setup post processors for a range of machines that we currently have within the workshop (VMC, CNC Lathes, 4 &amp; 5 Axis Machining Centres). We have recently had a mass upgrade of our AutoDesk products and a decision was made to make a switch to FeatureCAM from EdgeCAM as our CAM Package.</P><P>&nbsp;</P><P>However, I am struggling to find any information/guidance on how to setup post processors for our machines to enable the correct output of NC code file for those releavnt machines. I have managed to find a folder containing machine communication files and what possibly appears to be the post processors, but no idea how to make these work for featureCAM if at all possible.</P> Mon, 18 Dec 2017 21:53:27 GMT Anonymous 2017-12-18T21:53:27Z https://forums.autodesk.com/t5/featurecam-forum/featurecam-2017-post-processor-setup/m-p/7633468#M5705 <P>Hi, just after some advice on how to setup post processors for a range of machines that we currently have within the workshop (VMC, CNC Lathes, 4 &amp; 5 Axis Machining Centres). We have recently had a mass upgrade of our AutoDesk products and a decision was made to make a switch to FeatureCAM from EdgeCAM as our CAM Package.</P><P>&nbsp;</P><P>However, I am struggling to find any information/guidance on how to setup post processors for our machines to enable the correct output of NC code file for those releavnt machines. I have managed to find a folder containing machine communication files and what possibly appears to be the post processors, but no idea how to make these work for featureCAM if at all possible.</P> Mon, 18 Dec 2017 21:53:27 GMT https://forums.autodesk.com/t5/featurecam-forum/featurecam-2017-post-processor-setup/m-p/7633468#M5705 Anonymous 2017-12-18T21:53:27Z https://forums.autodesk.com/t5/featurecam-forum/featurecam-2017-post-processor-setup/m-p/7638375#M5706 Hi, I'm not sure I understand you right, but the postprocesser file to FeatureCAM have the extention *.*CNC I have made a small video to show how you can find them. <A href="http://autode.sk/2z4KwjK" target="_blank">http://autode.sk/2z4KwjK</A> Thank you, Jacob Wed, 20 Dec 2017 13:53:38 GMT https://forums.autodesk.com/t5/featurecam-forum/featurecam-2017-post-processor-setup/m-p/7638375#M5706 Anonymous 2017-12-20T13:53:38Z