topic FeatureCAM 2019 Released in FeatureCAM Forum

FeatureCAM 2019 Released

chan.solanki — Thu, 29 Mar 2018 13:49:38 GMT

It is our pleasure to announce the release of FeatureCAM 2019. Subscribers and customers with an active maintenance plan should be able to find it in their Autodesk Desktop Application. If it is not visible there then you should be able to access it from your Autodesk account page here.

The main features of PowerMill 2019 are:

Directed Feature Recognition
Center Drill Improvements
Usability Improvements
Back Cutting
Redial Pattern Improvements
Swiss Turning Improvements
Upload to Fusion Production
Online help
Autodesk Drive

To learn more about this release, visit the FeatureCAM online help site or watch the guided tutorials on YouTube.

Re: FeatureCAM 2019 Released

Anonymous — Thu, 29 Mar 2018 19:20:20 GMT

No sign yet of a download through any of the various methods suggested. Am I a bit quick off the mark ?

Re: FeatureCAM 2019 Released

Anonymous — Fri, 30 Mar 2018 04:31:07 GMT

I have looked several times today also and I can’t see it.

Re: FeatureCAM 2019 Released

bhorstTGM48 — Fri, 30 Mar 2018 04:38:58 GMT

I saw some Utube videos starting to pop up for 2019

Re: FeatureCAM 2019 Released

Anonymous — Fri, 30 Mar 2018 12:24:58 GMT

Still nothing this morning

Re: FeatureCAM 2019 Released

acad-caveman — Fri, 30 Mar 2018 21:54:48 GMT

Seriously?

"""

32-bit file compatibility: This release supports the loading of legacy 32-bit FeatureCAM part files (.fm, .mf, .tsf, .md). In a future update of FeatureCAM 2019, the ability to load part files saved from a 32-bit version of FeatureCAM will be removed. This does not affect part files saved from FeatureCAM 2016, 2017, or 2018 versions, but may affect files from earlier versions.

"""

Re: FeatureCAM 2019 Released

bhorstTGM48 — Sat, 31 Mar 2018 21:03:54 GMT

Has anyone been able to download this yet? I still dont see it available?

Re: FeatureCAM 2019 Released

Anonymous — Sat, 31 Mar 2018 21:11:53 GMT

I still do not see it

Re: FeatureCAM 2019 Released

Anonymous — Mon, 02 Apr 2018 11:52:54 GMT

it's the 2nd now and still no sign of 2019release

Re: FeatureCAM 2019 Released

Anonymous — Mon, 02 Apr 2018 13:51:47 GMT

Can someone from Autodesk please reply on the status of this?

Re: FeatureCAM 2019 Released

spencer.hardcastle — Tue, 03 Apr 2018 10:39:02 GMT

Hi all,

Please find a answer to this problem in the following thread.

Autodesk FeatureCAM - 2019 Release

Sorry for the inconvenience caused by this. The Autodesk team is working very hard to get this issue resolved in a timely manner.

Thanks for your patience.

Re: FeatureCAM 2019 Released

Anonymous — Tue, 03 Apr 2018 14:38:33 GMT

Thanks for an update. Not sure why you started another thread, so I will keep it on the original.

I don't have subscription, but a perpetual.

Why am I being affected by the subscription problem?

Re: FeatureCAM 2019 Released

Anonymous — Sat, 07 Apr 2018 17:21:10 GMT

I was able to download and install FC2019 yesterday. Installed fine- still has a glitchy screen (somewhat flashes black and goes out of focus and hangs a little), but certainly less flickering than 2018

Re: FeatureCAM 2019 Released

Muppett1 — Mon, 09 Apr 2018 13:58:01 GMT

I've tried to download it twice today, still keep getting an "install error 1063?" I think it is. Any help with this one? I'm still trudging along with Windows 7 also, which could be the culprit.

Tried "Install Now", and downloaded it as well, still kept getting the install error.

Re: FeatureCAM 2019 Released

jeff.brower — Mon, 09 Apr 2018 19:10:34 GMT

Installed without issue on our win 7 system

Re: FeatureCAM 2019 Released

Anonymous — Mon, 09 Apr 2018 20:53:47 GMT

I installed it on my computer with no problem. I have windows 7.

Re: FeatureCAM 2019 Released

Muppett1 — Tue, 10 Apr 2018 10:41:36 GMT

Thanks guys, I uninstalled all relevant FC2019 files, then attempted to re-install with the same results. Not sure what's going on at this point. When I open FC2018 tho, the screen logo from FC2019 comes up tho I believe it is, with the FC2018 title. Strange.

Re: FeatureCAM 2019 Released

Anonymous — Wed, 11 Apr 2018 11:44:29 GMT

I've run into issues like this before with Autodesk products. The only way they were able to resolve the issue was to completely uninstall all old versions making sure there were no traces left behind in you registry. Then installing the new version. It was standard practice with earlier versions of Inventor.

Re: FeatureCAM 2019 Released

Muppett1 — Wed, 11 Apr 2018 11:56:57 GMT

That may be what's needed, but I've kept my older versions of FCam and have gone back to them on occasion for different purposes, and still want to keep them. I still can't understand why others have had no issues using Windows7, and yet I am? There are a couple more tricks to try from the link that jd posted, and I have already uninstalled the Microsoft Visual C ++ 2010 x86 Redistributable file and tried to install FCam 2019 after to no avail. There are more suggestions along that line, but I'll feel more comfortable having our IT guy delve into that area. I'll keep everyone updated when/if I achieve a solution. Thanks for all the help and replies everyone, much appreciated!

Re: FeatureCAM 2019 Released

Anonymous — Wed, 11 Apr 2018 14:40:07 GMT

We had problems with our network tool database to where it would see it, but couldnt access it. Took creating a new database and initializing it a few times to make it work.