topic Re: Eagle 9.6.1 lost sync with Fusion. in EAGLE Forum

Eagle 9.6.1 lost sync with Fusion.

dmytro.dvv — Wed, 22 Apr 2020 10:27:40 GMT

I create the PCB outline in the Fusion - save it ass PCB.

In Eagle create new pcb -> press Fusion 360 -> Link to an existing.... -> chose PCB -> pull from Fusion -> Close -> add components -> Save -> push to Fusion -> save -> close Eagle -> open Eagle and link to Fusion is missed.

To push changes I need manually go through all these steps each time when I open PCB:
press Fusion 360 -> Link to an existing.... -> chose PCB -> pull from Fusion ->

The link between Eagle and Fusion work till I close the project, after close, I should add it again.

Use the same account for both Fusion and Eagle.

Re: Eagle 9.6.1 lost sync with Fusion.

fronders — Wed, 29 Apr 2020 15:12:05 GMT

I noticed a similar issue on 9.6.1. I have a ready PCB, now I want to push it to Fusion. It does push successfully. But each time I close the project, it loses the link to existing Fusion source.

Re: Eagle 9.6.1 lost sync with Fusion.

tedEUQZT — Tue, 23 Jun 2020 18:53:06 GMT

I'm also getting this, it's not universal, some files stay linked, but the most important "top level" board in my assembly loses the link every time I close the BRD/SCH files.

Re: Eagle 9.6.1 lost sync with Fusion.

tedEUQZT — Tue, 23 Jun 2020 19:04:09 GMT

Appears to be fixed in the 9.6.2 update.