topic Re: Creating custom size through hole pad in EAGLE Forum (Read-Only)

Creating custom size through hole pad

Anonymous — Tue, 05 May 2020 11:51:52 GMT

I need to create oval-shaped pads with oval holes, specifically for USB TYPE-C connectors. I understand that I need to use the milling layer for the oval through-hole. However, my question is primarily about how to achieve different widths and heights of the pad itself. I have attached the design document and the pads are marked in red. I can't seem to find a way on Eagle yet. I use Eagle 9+.

Re: Creating custom size through hole pad

Anonymous — Wed, 06 May 2020 15:12:58 GMT

Hello @Anonymous ,

For oval, or oblong shapes like those, you can use an smd pad, shape it with the length and width that you want, and the round the edges with radius 'width/2' (or any, actually).

Then, as you said, you would have to use the milling layer to create the custom hole

I you want a more complex shape, you would have to use a polygon

Re: Creating custom size through hole pad

Anonymous — Fri, 05 Jun 2020 04:04:14 GMT

no funciono :C

Re: Creating custom size through hole pad

Anonymous — Mon, 08 Jun 2020 08:43:35 GMT

What was the problem?

Re: Creating custom size through hole pad

donald_wright — Sun, 10 Jan 2021 18:38:58 GMT

I'm also trying to make a costume pad. The problem is, I don't understand why when I use the polygon tool, I can't see the PAD layer anymore. Surely a beginner's mistake but there, since this morning that I try to find a solution in vain. Can someone give me a little help. The part number is ACS770200CB. I did download from Ultra Librarian but the layout is unacceptable.

EagleCAD of the layout!

I did try to re-edit!

Thanks for your help!

Re: Creating custom size through hole pad

Anonymous — Thu, 25 Feb 2021 16:42:10 GMT

Hi,

what I don't get is why I can't define the size of my own pad.. i.e.

1) Pick a Pad (Not SMD)

2) set the dimensions of the pad and the drill size

I can set the drill size but not the pad size!

Is there any way to do this in eagle?

thanks

Re: Creating custom size through hole pad

one-of-the-robs — Thu, 25 Feb 2021 17:23:26 GMT

@Anonymous wrote:

I can set the drill size but not the pad size!

Is there any way to do this in eagle?

When you add a pad in the footprint editor, you can set both the drill size and the pad size. The pad size defaults to "auto" (which means it's entirely controlled by the DRC settings) but you can set it. However, if your board has DRC settings that your specified pad size violates - specifically the "annular ring" minimum width - then the board editor overrides the library because you're telling it you can't manufacture what the library says.

Re: Creating custom size through hole pad

HarrySatt — Wed, 23 Feb 2022 15:00:25 GMT

Hi there.

KiCAD can do that. Why AutoDesk is not working on this issue. I think more and more connectors need this style and FUSION360 does not offer. This feature is really nesseccary.

HI there @jorge_garcia @RichardHammerl

Re: Creating custom size through hole pad

RichardHammerl — Wed, 23 Feb 2022 15:03:35 GMT

Hi @HarrySatt ,

if I am informed correctly, there is somebody working on this. Give us some more time. 😉 There are plenty of things to get done. We are on it....

Regards,

Re: Creating custom size through hole pad

harshanaNAAMK — Tue, 26 Jul 2022 10:14:00 GMT

Hi all, is this feature available now?

Re: Creating custom size through hole pad

RichardHammerl — Tue, 26 Jul 2022 11:06:57 GMT

Hello @harshanaNAAMK ,

slotted pads are available in Fusion Electronics now. It's just a new option for the PAD command.
Sorry, it did not make it into EAGLE.

Best regards,

Re: Creating custom size through hole pad

harshanaNAAMK — Wed, 27 Jul 2022 04:33:15 GMT

Hi @RichardHammerl

Do you have plan to add this feature to eagle cad also?

Re: Creating custom size through hole pad

RichardHammerl — Wed, 27 Jul 2022 06:52:41 GMT

Hi @harshanaNAAMK ,

thanks for you participaion in our forums and I hope my message findes you well.

I am sorry, but currently there are no plans to implement this feature ito EAGLE.

Best regards,

Re: Creating custom size through hole pad

lucC6EXD — Tue, 31 Dec 2024 11:49:11 GMT

This is so sad that you stop Eagle. I've been using Eagle for nearly 30 years. It is the most powerful and fast electronic EDA software.

I'll start soon with Kikad, I've tried Fusion 360, it is so slow comparing Eagle. If you don't wish to loose customers, I hope that you will propose a life license for the current eagle version. I can pay for that 😉