topic Error during ERC in EAGLE Forum

Error during ERC

jer.rodrigues — Tue, 02 Sep 2025 16:50:59 GMT

Hello

During the ERC, I got a warning message "No pins on net N$22".

When I click on the warning message, it doesn't point to any parts/links/... and I searched for a missing things, but I did not find anything.

On the generated PCB, no trace of N$22 indication.

How could I found or fix this warning message please ?

Thanks

Re: Error during ERC

jorge_garcia — Tue, 02 Sep 2025 21:21:54 GMT

Hello @jer.rodrigues ,

I hope you're doing wells. The warning implies that there is a floating net in the schematic. Try the following in the schematic CLI type

Show @ N$22

Does anything get framed? If nothing, then means there is a phantom net in the XML. It won't harm anything so you can ignore it.

Let me know if there's anything else I can do for you.

Best Regards,

Re: Error during ERC

jer.rodrigues — Wed, 03 Sep 2025 21:32:50 GMT

Hello Jorge, thanks for your quick answer.

unfortunately, nothing is shown with this command, I received this popup only, but no wire is framed... So I will keep it as is... thanks