topic Re: Eagle schematic simulation help in EAGLE Forum (Read-Only)

Eagle schematic simulation help

astrumik — Thu, 25 Nov 2021 18:19:29 GMT

Hi all. I'm attempting to learn how to use Eagle and importantly the simulation fetchers after researching how to uses these tool I tried to produce a bridge rectifier circuit but ended up getting sum undesirable outputs from the simulation (shown bellow). Does anyone have any thoughts on what went wrong / ways to fix the problem.

Edit: All components used where from the ngspice-simulation folder.

Schematic (Input: sinusoidal @3V, 1Hz)

Voltage Output

Re: Eagle schematic simulation help

astrumik — Thu, 25 Nov 2021 18:42:06 GMT

Turns out easy fix by just moving the ground. I would of just deleted the post but you don't seem to have the ability so here is the solution just in case anyone ever the same problem.

Re: Eagle schematic simulation help

one-of-the-robs — Thu, 25 Nov 2021 19:57:45 GMT

Glad you found the fix. The simulation is doing exactly what you ask it to but you were initially asking the wrong question. Now that you've asked the right question all is well.

Re: Eagle schematic simulation help

3371794779 — Sun, 11 Sep 2022 12:42:45 GMT

我按照你的电路图纸，为什么没有波形，请问

Re: Eagle schematic simulation help

3371794779 — Sun, 11 Sep 2022 12:44:19 GMT

Do simulation results need to be set

Re: Eagle schematic simulation help

3371794779 — Sun, 11 Sep 2022 12:44:37 GMT

Do simulation results need to be set