topic Re: "Error pulling from Fusion" in EAGLE Forum

"Error pulling from Fusion"

davidHMVUB — Sat, 09 Jun 2018 19:42:55 GMT

I am getting the unhelpful error "Error pulling from Fusion" when trying to pull from Fusion.

I suspect that it is because I moved the PCB in the Fusion timeline. Restarting Fusion and Eagle didn't solve the problem.

I had originally moved some components in Fusion to match positions in the Fusion model. I decided to abandon those changes and see if pushing from Eagle would reset things. Interestingly, it appears to have moved the PCB back to its original position in the timeline. I then moved the components again in Fusion, but once again received "Error pulling from Fusion" when trying to pull.

Any ideas?

Re: "Error pulling from Fusion"

jorge_garcia — Mon, 11 Jun 2018 20:43:35 GMT

Hi @davidHMVUB,

I hope you're doing well. At this point the model is probably messed up. If possible I would suggest breaking the link between EAGLE and fusion and then do a new push to Fusion360.

I'll ping out developers on this to see if they have any other ideas.

Please let me know if there's anything else I can do for you.

Best Regards,

Re: "Error pulling from Fusion"

yqliu — Wed, 13 Jun 2018 02:29:01 GMT

Hi @davidHMVUB,

Did you see any more text after "Error pulling from Fusion" in the message dialog? Can you copy the full message or the screenshot here?

Thanks,

Richard

Re: "Error pulling from Fusion"

orbssam — Thu, 14 Mar 2019 09:13:00 GMT

Hello! I am getting exactly the same error when making a simple fillet change in a board profile,I have been using the bridge Eagle~Fusion for a while now and never experienced this as well doing much more complex changes.I have tried everything, multiple times resetting the link, pull, push etc etc. I am wondering/hoping there has been a solution perhaps? The error in this context is extremely unhelpful I agree 🙂

Re: "Error pulling from Fusion"

orbssam — Fri, 15 Mar 2019 10:31:48 GMT

Hello again, in more detail. The message box simply reads Error Pulling from Fusion, see attached image. I have now spent enough time trying what I can to debug the issue that I can say it makes no sense, is there an option to just sync the profiles? Perhaps it is a custom part that is causing an issue, but then again, I have no idea. Annoyingly, my design has 4 pcbs which are totally fine pulling from fusion, this is the odd one out and I can't think why. If there would be any support available, I would be most grateful.

Re: "Error pulling from Fusion"

yqliu — Fri, 15 Mar 2019 13:46:36 GMT

Hi @orbssam ,

can you go to Fusion and check if there is any issue with the PCB feature. If the timeline marker is rolled back to some position before the PCB feature, pull operation will fail.

Re: "Error pulling from Fusion"

orbssam — Fri, 15 Mar 2019 14:24:24 GMT

Hi, no it all looks fine. Screenshot attached.

Re: "Error pulling from Fusion"

orbssam — Wed, 20 Mar 2019 13:23:09 GMT

Honestly, I tried everything. Support would be helpful, but have since decided not to use this feature for this board. I want to use it in the future so am looking forward to some more descriptive error messages when you finish the project! It's great otherwise! 🙂

Re: "Error pulling from Fusion"

jalilmB2AY9 — Thu, 11 Apr 2019 21:54:31 GMT

I am facing the exact same issue, I basically created a new design to see if the issue was related to timeline but I still get the same error with absolutely no reference to why it failed.

The only thing that stands out for me is I recently updated to eagle 9.3.2 and this is my first design on the newer version of eagle.

Re: "Error pulling from Fusion"

yqliu — Sat, 13 Apr 2019 04:37:31 GMT

We just found an issue with Fusion Team Hub. How many hubs do you have? If you have multiple hubs, can you try a different one?

Re: "Error pulling from Fusion"

orbssam — Sat, 13 Apr 2019 18:05:53 GMT

Just one hub I have.

Re: "Error pulling from Fusion"

jalilmB2AY9 — Mon, 15 Apr 2019 16:39:13 GMT

I am not using Fusion Team functionality at all, Its just me working on a single design.

I have the existing error pulling from Fusion and now i see a new error while trying to push a new design. I have attached a picture with the post. Is there a dump log created by EAGLE ? It might be worth looking to troubleshoot the problem.