topic Re: Give dynamic array distance a variable length in Dynamic Blocks Forum

Give dynamic array distance a variable length

ohalloba — Thu, 13 Jan 2022 21:54:23 GMT

Hello everyone,

I'm trying to create a "bifold glass door" dynamic block that can be arrayed, but the door can also be adjusted to different sizes and still be arrayed while being attached. When I use an array it only allows me to pick a static distance. I was wondering if it was possible to change that static distance to a variable depending on the glass door size. Thanks!

Re: Give dynamic array distance a variable length

j.palmeL29YX — Fri, 14 Jan 2022 05:30:34 GMT

Post your block please.

Re: Give dynamic array distance a variable length

ohalloba — Fri, 14 Jan 2022 14:14:49 GMT

I'm trying to make it so no matter the size you stretch it, the windows will always array the length of the window. I'm relatively new to dynamic blocks.

Re: Give dynamic array distance a variable length

j.palmeL29YX — Fri, 14 Jan 2022 18:57:28 GMT

Are you looking for something like >>this<<?

Re: Give dynamic array distance a variable length

ohalloba — Fri, 14 Jan 2022 21:52:15 GMT

Thank you so much for creating the block, but I'd love to know the steps for the future if it's not a bother. Thanks again.

Re: Give dynamic array distance a variable length

j.palmeL29YX — Sun, 16 Jan 2022 11:05:00 GMT

@ohalloba wrote:

I'd love to know the steps for the future if it's not a bother.

My first attempt above was not well designed, therefore you find here attached an improved version.

The main principle: As far as I know it is not possible to modify the source object(s) of an array inside a dynamic block. But in the current case you can create a dynamic array and hide the unwanted parts of the middle line behind a wipeout. You can follow the detailed steps in >>this video<<.

(I'm afraid it is not easy to understand. If you have further questions, ask again).

Hint: In the current version the user must ensure that the Length overall must be greater than the 2*Width (or the Width must be smaller than Legth/2. In a later version this can be included in the block definition).

Re: Give dynamic array distance a variable length

ohalloba — Tue, 18 Jan 2022 17:12:55 GMT

Amazing video and I'm following along nicely, but at the part where we have to array the 2 rectangles on a path, I get an error saying "A dimensional constraint or user variable with an expression has been set to a numerical value." And deletes the "Width" dimension on the top, but I'm following your instructions step by step.

Re: Give dynamic array distance a variable length

ohalloba — Tue, 18 Jan 2022 17:48:47 GMT

before arrayAfter arrayas I exit array

When I copy and paste your block into my drawing that message pops up again and ruins the block

Re: Give dynamic array distance a variable length

j.palmeL29YX — Tue, 18 Jan 2022 18:59:03 GMT

At the latest before creating the array set the system variable DELOBJ to 0.

(After creating the array you can set DELOBJ back to the value of your need).

Try if that helps and let me know. (I'm not yet sure why that "When I copy and paste your block into my drawing that message pops up again and ruins the block" happens. )

Re: Give dynamic array distance a variable length

ohalloba — Tue, 18 Jan 2022 19:49:21 GMT

I got everything working, thank you so much!

Re: Give dynamic array distance a variable length

heretic2k — Wed, 26 Jun 2024 01:48:22 GMT

You can use constraint parameters to achieve your ideas

Re: Give dynamic array distance a variable length

heretic2k — Wed, 26 Jun 2024 01:49:26 GMT

You can use constraint parameters to achieve your ideas

Re: Give dynamic array distance a variable length

j.palmeL29YX — Wed, 26 Jun 2024 10:03:24 GMT

@heretic2k

Obviously this suggestion refers to another thread ( ?).
But regardless of that, allow me a few hints:
- You forgot a coinzident constraint.

(view in My Videos)

Now it works.

- Next: I'd suggest to constrain as much as possible using geometrical constraints. As example: you can (and should) delete all the dimensional parameters, which depend on W (d1, d3, d5, d6, d7). Use "Equal" constraints instead. The same for all dimensions depending on T.

- Additional: For all those dimensions that may be necessary but should not be controlled by the user, don't use dimensional constraint Parameters (bcparameter command). Use instead suitable dimensional constraints (one of the dc... commands). (In the current example we don't need such dimensions)

Bonus: For fun I added an angular constraint to open/close the door.

My 2ct only

Re: Give dynamic array distance a variable length

laurenyy — Wed, 12 Mar 2025 17:39:05 GMT

Thank you for the video. I am stuck at the part where you enter "floor" for d2 dimension. Where is the "floor" variable defined?

Re: Give dynamic array distance a variable length

j.palmeL29YX — Wed, 12 Mar 2025 19:23:38 GMT

floor is a mathematical function which rounds down a numerical value to the next Integer.

Snip from the help: