topic Re: Swing on Door Elevation Block Not Staying Centered Vertically in Dynamic Blocks Forum

Swing on Door Elevation Block Not Staying Centered Vertically

estringer — Fri, 28 Jul 2023 15:13:56 GMT

I am creating a door elevation block that changes height and width but I am having issues with the swing indicator. It is not staying centered vertically when the height is adjusted.

Re: Swing on Door Elevation Block Not Staying Centered Vertically

h_s_walker — Fri, 28 Jul 2023 15:22:16 GMT

Remove those lines from your main stretch action. Add another stretch action to your vertical distance parameter. Make sure you only put the crossing selection around those two lines. Change the distance multiplier to 0.5.

See the image below

Re: Swing on Door Elevation Block Not Staying Centered Vertically

estringer — Fri, 28 Jul 2023 15:29:06 GMT

That helps with the original problem but now the top line at the top right corner is not stretching with the rest of the frame.

Re: Swing on Door Elevation Block Not Staying Centered Vertically

estringer — Fri, 28 Jul 2023 15:31:22 GMT

Okay, I added another stretch to that part and it works now. Thank you for your help!