topic Re: Batt Insulation Block in Dynamic Blocks Forum

Batt Insulation Block

Anonymous — Fri, 24 Aug 2007 20:48:06 GMT

I am trying to make this insulation scale and array using dynamic blocks. I have it scaling using a list but the array does not work after the scale. Is there a way to set up the column offset to be equal to the scale factor? The attached file shows the problem. It works perfectly at 3". When scaled to 3 1/2" or more the problem starts.

Thank you in advance for your help.

Re: Batt Insulation Block

Anonymous — Fri, 24 Aug 2007 22:14:08 GMT

To do this using only built-in options, you will have to make a visibility state for each scale with appropriate array offset. The other option requires customization if you don't have AcadLT.

The attached is the way with customization. View the Readme to set up.

Re: Batt Insulation Block

Anonymous — Mon, 27 Aug 2007 07:33:28 GMT

here is mine.....insert it at a scale to suite the thickness required....of
you need 50mm thick insulation insert the block with a scale of 50..

Re: Batt Insulation Block

Anonymous — Wed, 14 Nov 2007 20:45:18 GMT

I have the same problem. Did you ever find a solution?

Re: Batt Insulation Block

Anonymous — Thu, 15 Nov 2007 18:31:28 GMT

The solutions have already been posted in this thread:-)

Re: Batt Insulation Block

Anonymous — Thu, 26 May 2016 17:35:00 GMT

I just wanted to say thank you very much for posting the insulation block, it was a great help.

Re: Batt Insulation Block

Libbya — Thu, 26 May 2016 20:57:02 GMT

Mine is a totally different concept that gives additional functionality.

Ynt: Batt Insulation Block

serkancavuslar — Fri, 27 May 2016 08:49:16 GMT

New Super RockWool

Re: Batt Insulation Block

Anonymous — Sat, 18 Mar 2017 19:23:07 GMT

Thank you for the Block - finally it's works !!!!

Re: Batt Insulation Block

Emmsleys — Fri, 31 Mar 2017 23:43:38 GMT

Following up on your thread, were you able to find a solution or a workaround?

Did any of the posts in the thread help with the issue?

Please use the Accept as Solution for those post’s that helped. It may benefit other users who might have a similar question or issue.

Thanks for your time.